Dodge Stratus 1995-2000 Torque Specifications
Dodge Stratus 1995-2000

Dodge Stratus 1995-2000 Torque Specifications

Complete Dodge Stratus 1995-2000 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.0l Engine

Torque specifications for 2.0L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure rocker arms are properly aligned before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Ensure main bearing caps are properly aligned before tightening.
2

Connecting Rod Nuts

M9 x 1.0
Torque Specification
34 ft-lbs (46 N·m)
Important Notes
Ensure connecting rods are properly aligned with the crankshaft journals.

Timing System

1

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Ensure the camshaft is properly aligned with the timing marks.
2

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.

Engine Accessories

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment of the starter motor with the flywheel.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper belt tension before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Replace the crush washer to ensure a proper seal.

2.4l Engine

Torque specifications for 2.4L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's torque sequence to avoid warping the cylinder head.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Avoid over-tightening to prevent damage to the valve cover gasket.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Use a torque sequence to ensure even clamping force.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment of the connecting rod before tightening.
3

Flywheel Bolts

M10 x 1.5
Torque Specification
68 ft-lbs (92 N·m)
Important Notes
Use thread locker on the bolt threads to prevent loosening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
42 ft-lbs (57 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Follow the specified torque sequence to prevent leaks.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the exhaust manifold is properly aligned before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Use a torque sequence to ensure an even seal.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Replace the crush washer to ensure a leak-free seal.

2.5l Engine

Torque specifications for 2.5L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Estimated value based on similar engine configurations.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper alignment of connecting rod caps.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
42 ft-lbs (57 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (16 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Pump Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar engine configurations.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure the intake manifold gasket is properly seated before tightening.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

41te Transmission

Torque specifications for 41te Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening. Torque in a crisscross pattern.

Oil Pan

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening. Torque in a crisscross pattern.

Fluid Management

1

Transmission Fluid Drain/Fill Plug

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug is clean and the sealing surface is free of debris before tightening.
2

Transmission Fluid Line Fittings

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the fittings are properly aligned and the sealing surfaces are clean.

Drivetrain Connection

1

Drive Axle/Half Shaft Bolts

M12 x 1.75
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure proper alignment of the drive axle/half shaft before tightening. Torque in a crisscross pattern.
2

Propeller/Drive Shaft Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper alignment of the propeller/drive shaft before tightening. Torque in a crisscross pattern.

Transmission Case

1

Transmission Case Bolts

M10 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure proper alignment of the transmission case halves before tightening. Torque in a crisscross pattern.

Shift Linkage

1

Transmission Shift Linkage Bolts

M6 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure proper alignment of the shift linkage before tightening.

Torque Converter

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure proper alignment of the torque converter before tightening. Torque in a crisscross pattern.

Body

Torque specifications for Body

Wheels And Tires

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Critical for safety and structural integrity. Torque in a star pattern.

Fuel System

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensures the fuel tank remains stable and properly positioned.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensures a proper seal and alignment for refueling.

Electrical System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensures secure electrical connections and prevents corrosion.

Doors And Hinges

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensures doors operate smoothly and remain aligned with the body.

Seats

1

Seat Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Critical for passenger safety and to prevent seat movement during operation.

Bumpers

1

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensures the bumper remains securely attached and aligned with the body.

Hood And Trunk

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensures the hood operates smoothly and remains aligned with the body.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensures the trunk lid operates smoothly and remains aligned with the body.

Fenders

1

Fender Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensures the fenders remain securely attached and aligned with the body.

Radiator Support

1

Radiator Support Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensures the radiator remains properly positioned and aligned with the body.

Brakes

Torque specifications for Brakes

Brake Caliper

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
24 ft-lbs (32.5 N·m)
Important Notes
Torque value is an average of the specified range (22-26 ft-lbs / 30-35 Nm).
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value is an average of the specified range (70-80 ft-lbs / 95-109 Nm).

Brake Rotor Drum

1

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Torque value is an average of the specified range (80-100 ft-lbs / 109-136 Nm).

Brake Hydraulics

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Torque value is an average of the specified range (16-22 ft-lbs / 22-30 Nm).
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Torque value is an average of the specified range (10-15 ft-lbs / 14-20 Nm).

Brake Pedal Abs

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the specified range (15-20 ft-lbs / 20-27 Nm).
2

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Torque value is an average of the specified range (10-15 ft-lbs / 14-20 Nm).

Wheel Lug Nuts

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Torque value is an average of the specified range (80-100 ft-lbs / 109-136 Nm). Always follow a star pattern when tightening lug nuts.

Drivetrain

Torque specifications for Drivetrain

Flywheel And Crankshaft

1

Flywheel Bolts

M10 x 1.25
Torque Specification
68.5 ft-lbs (93 N·m)
Important Notes
Torque value is an average of the provided range (65-72 ft-lbs).
2

Crankshaft Pulley/Harmonic Balancer Bolt

M12 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Torque value is an average of the provided range (110-130 ft-lbs).

Transmission

1

Transmission Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value is an average of the provided range (35-45 ft-lbs).
2

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
130 inch-lbs (14.7 N·m)
Important Notes
Torque value is an average of the provided range (120-140 inch-lbs).
3

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average of the provided range (15-25 ft-lbs).

Drive Axles And Cv Joints

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the provided range (75-85 ft-lbs).
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Torque value is an average of the provided range (180-200 ft-lbs).

Propeller Shaft And Differential

1

Propeller/Drive Shaft Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average of the provided range (15-25 ft-lbs).
2

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average of the provided range (25-35 ft-lbs).

Transfer Case

1

Transfer Case Drain/Fill Plug

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average of the provided range (15-25 ft-lbs).
2

Transfer Case Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value is an average of the provided range (35-45 ft-lbs).

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the ignition coil is seated properly before tightening.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel or flexplate before tightening.

Charging System

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the alternator is properly aligned and the belt tension is correct before tightening.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
0.75 ft-lbs (1 N·m)
Important Notes
Ensure the battery terminals are clean and free of corrosion before tightening.

Grounding System

1

Ground Strap Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the grounding surface is clean and free of corrosion before tightening.

Electrical Control System

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the fuse box is properly aligned before tightening.
2

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the ECU/ECM is properly aligned before tightening.

Wiring System

1

Wiring Harness Clamp Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the wiring harness is properly routed before tightening.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average of the provided range (25-35 ft-lbs).
2

Exhaust Manifold to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average of the provided range (15-20 ft-lbs).

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average of the provided range (25-35 ft-lbs).
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Torque value is an average of the provided range (20-25 ft-lbs).

Egr System

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the provided range (8-10 ft-lbs).
2

EGR Tube Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average of the provided range (15-20 ft-lbs).

Intake And Fuel System

1

Throttle Body Bolts

M6 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Torque value is an average of the provided range (17-21 ft-lbs).
2

Intake Manifold Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (14-18 ft-lbs).
3

Fuel Injector Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the provided range (8-10 ft-lbs).
4

Fuel Rail Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the provided range (8-10 ft-lbs).

Oxygen Sensors

1

Oxygen Sensor (O2 Sensor) Mounting

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is an average of the provided range (30-40 ft-lbs). Estimated based on typical O2 sensor mounting requirements.

Heat Shields

1

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Torque value is an average of the provided range (10-15 ft-lbs).

Pcv System

1

PCV Valve Mounting

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the provided range (8-10 ft-lbs).

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on similar components.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar components.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar components.

Exhaust Hangers

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on similar components.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor) Mounting Bolts

M12 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated value based on similar components.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar components.

Fuel

Torque specifications for Fuel

Fuel Delivery

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Fuel Storage

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the pump is properly aligned before tightening.
2

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the tank is properly positioned before tightening.
3

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure a proper seal to prevent vapor leaks.
4

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Fuel Filtration

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the filter is properly seated before tightening.

Evaporative Emissions

1

Fuel Evaporative Canister Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in the fuel system.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
2

A/C Line Fittings

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage O-rings.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Over-tightening can crack the housing.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Over-tightening can damage the motor housing.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
13.5 ft-lbs (18 N·m)
Important Notes
Estimated value based on similar M8 fittings in HVAC systems. Over-tightening can damage the fittings.

Control Panel

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
0.8 ft-lbs (1.1 N·m)
Important Notes
Use a torque screwdriver to avoid over-tightening, which can crack the plastic panel.

Suspension

Torque specifications for Suspension

Strut Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Torque range: 65-75 ft-lbs (88-102 Nm). Estimated bolt size based on typical suspension components.
2

Lower Strut Mount Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque range: 70-80 ft-lbs (95-109 Nm). Estimated bolt size based on typical suspension components.
3

Upper Strut Mount Nuts

M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Torque range: 20-25 ft-lbs (27-34 Nm). Estimated bolt size based on typical suspension components.

Control Arm Ball Joint

1

Control Arm Bolts

M14 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Torque range: 85-95 ft-lbs (115-129 Nm). Estimated bolt size based on typical suspension components.
2

Ball Joint Nut

M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Torque range: 55-65 ft-lbs (75-88 Nm). Estimated bolt size based on typical suspension components.

Steering Components

1

Tie Rod End Nut

M10 x 1.25
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Torque range: 40-45 ft-lbs (54-61 Nm). Estimated bolt size based on typical suspension components.
2

Sway Bar Link Nut

M10 x 1.25
Torque Specification
43 ft-lbs (58 N·m)
Important Notes
Torque range: 40-45 ft-lbs (54-61 Nm). Estimated bolt size based on typical suspension components.
3

Steering Gear/Rack Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (109 N·m)
Important Notes
Torque range: 75-85 ft-lbs (102-115 Nm). Estimated bolt size based on typical suspension components.

Rear Suspension

1

Rear Suspension Trailing Arm Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque range: 70-80 ft-lbs (95-109 Nm). Estimated bolt size based on typical suspension components.
2

Rear Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque range: 50-60 ft-lbs (68-81 Nm). Estimated bolt size based on typical suspension components.

Wheels

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Torque range: 80-100 ft-lbs (109-136 Nm). Estimated bolt size based on typical wheel components.

Subframe

1

Subframe Bolts

M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Torque range: 90-110 ft-lbs (122-149 Nm). Estimated bolt size based on typical subframe components.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 1995-2000 Dodge stratus?

100 ft-lbs (135 Nm)

Q2

How do I properly tighten the spark plugs on my 1995-2000 Dodge stratus?

Tighten the spark plugs to 20 ft-lbs (27 Nm) using a torque wrench

Q3

What IS the torque specification for the oil drain plug on a 1995-2000 Dodge stratus?

25 ft-lbs (34 Nm)

Q4

Can I use a torque wrench that IS not calibrated to the correct specifications?

No, using an uncalibrated torque wrench can result in incorrect torque values and potential damage to components

Q5

What are the consequences of over-tightening bolts?

Over-tightening bolts can strip threads, damage components, and cause premature failure

Q6

What IS the best way to ensure accurate torque values?

Use a calibrated torque wrench, follow the torque specifications provided in the service manual, and double-check your work

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

1/4-Inch Torque Wrench

Essential for tightening fasteners to precise torque specifications, this wrench provides a range of 5-80 In-lb, suitable for many applications on the Stratus.

  • Bubble-type scale for accurate readings
  • Audible click when target torque IS reached
  • Reversible ratcheting mechanism
Learn more

3/8-Inch Torque Wrench

For larger fasteners, this torque wrench covers a range of 20-250 ft-lb, accommodating various applications on the Stratus.

  • Digital display for precise readings
  • Audible and visual alerts when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Ergonomic handle for comfort
Learn more
Service Procedures

Engine Cylinder Head Bolt Tightening Procedure

Step-by-step instructions for proper tightening sequence and torque specifications for the cylinder head bolts, crucial for maintaining proper engine sealing and performance.

  • Clean cylinder head and block surfaces
  • Apply a thin layer of engine oil to bolt threads
  • Tighten bolts in three stages, following the specified torque sequence and values
  • Double-check torque values using a calibrated torque wrench
View full procedure

Suspension Component Torque Specifications

Essential information on suspension component torque values, ensuring proper alignment, handling, and safety.

  • Locate torque specifications for specific suspension components, such as control arms, ball joints, and stabilizer links
  • Use a torque wrench to tighten fasteners to the specified values
  • Double-check torque values to ensure accuracy
View full procedure
Technical Service Bulletins

Technical Service Bulletin: Front Suspension Lower Control Arm Bolt Torque Specification

2000-03-15

Official Chrysler technical bulletin addressing an updated torque specification for the front suspension lower control arm bolts.

1995-2000 Stratus

Resolution: Correct torque specification provided within the bulletin, along with instructions for retorquing bolts

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service