Dodge Ram 3500 2010-2018
Dodge Ram 3500 2010-2018 Torque Specifications
Complete Dodge Ram 3500 2010-2018 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
5.7l Engine
Torque specifications for 5.7L Engine
5.7l Engine
Torque specifications for 5.7L Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 90°
3. 90°
Important Notes
Torque-to-yield bolts. Must be replaced after removal. Follow the manufacturer's torque sequence to prevent warping.
Main Bearing Caps
1 Main Bearing Cap Bolts
M10 x 1.25
1
Main Bearing Cap Bolts
M10 x 1.25
Torque Specification
1. 80 ft-lbs (108 N·m)
2. 90°
Important Notes
Torque-to-yield bolts. Must be replaced after removal. Follow the manufacturer's torque sequence.
Connecting Rods
1 Connecting Rod Bolts
M8 x 1.0
1
Connecting Rod Bolts
M8 x 1.0
Torque Specification
1. 45 ft-lbs (61 N·m)
2. 90°
Important Notes
Torque-to-yield bolts. Must be replaced after removal. Follow the manufacturer's torque sequence.
Intake Manifold
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer's torque sequence to prevent warping.
Exhaust Manifold
1 Exhaust Manifold Bolts
M8 x 1.25
1
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer's torque sequence to prevent warping.
Camshaft Sprocket
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper alignment of the timing marks before tightening.
Crankshaft Damper
1 Crankshaft Damper Bolt
M16 x 1.5
1
Crankshaft Damper Bolt
M16 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
Important Notes
Ensure the crankshaft is properly secured before tightening.
Oil Pan
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Flywheel Flexplate
1 Flywheel/Flexplate Bolts
M10 x 1.25
1
Flywheel/Flexplate Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure proper alignment of the flywheel/flexplate before tightening.
Timing Cover
1 Timing Cover Bolts
M6 x 1.0
1
Timing Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Valve Cover
1 Valve Cover Bolts
M6 x 1.0
1
Valve Cover Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Spark Plug
1 Spark Plug
M14 x 1.25
1
Spark Plug
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper thread engagement to avoid cross-threading.
Thermostat Housing
1 Thermostat Housing Bolts
M6 x 1.0
1
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Water Pump
1 Water Pump Bolts
M6 x 1.0
1
Water Pump Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Rocker Arms
1 Rocker Arm Bolts
M8 x 1.25
1
Rocker Arm Bolts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper valve operation.
Oil Pump
1 Oil Pump Bolts
M6 x 1.0
1
Oil Pump Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Bellhousing
1 Bellhousing Bolts
M10 x 1.25
1
Bellhousing Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Engine Mounts
1 Engine Mount Bolts
M10 x 1.25
1
Engine Mount Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Fuel Rail
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Throttle Body
1 Throttle Body Bolts
M6 x 1.0
1
Throttle Body Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Oil Filter Adapter
1 Oil Filter Adapter Bolts
M6 x 1.0
1
Oil Filter Adapter Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Timing Chain Tensioner
1 Timing Chain Tensioner Bolts
M6 x 1.0
1
Timing Chain Tensioner Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper tension.
Camshaft Position Sensor
1 Camshaft Position Sensor Bolts
M6 x 1.0
1
Camshaft Position Sensor Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Crankshaft Position Sensor
1 Crankshaft Position Sensor Bolts
M6 x 1.0
1
Crankshaft Position Sensor Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Alternator
1 Alternator Mounting Bolts
M8 x 1.25
1
Alternator Mounting Bolts
M8 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Power Steering Pump
1 Power Steering Pump Bolts
M6 x 1.0
1
Power Steering Pump Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Ac Compressor
1 A/C Compressor Bolts
M6 x 1.0
1
A/C Compressor Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Starter Motor
1 Starter Motor Bolts
M8 x 1.25
1
Starter Motor Bolts
M8 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Transmission Pan
1 Transmission Pan Bolts
M6 x 1.0
1
Transmission Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Transmission Filter
1 Transmission Filter Bolts
M6 x 1.0
1
Transmission Filter Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Transmission Cooler Lines
1 Transmission Cooler Line Fittings
M6 x 1.0
1
Transmission Cooler Line Fittings
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper sealing.
Transmission Mount
1 Transmission Mount Bolts
M10 x 1.25
1
Transmission Mount Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Transfer Case
1 Transfer Case Bolts
M10 x 1.25
1
Transfer Case Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Drive Shaft
1 Drive Shaft Bolts
M10 x 1.25
1
Drive Shaft Bolts
M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper alignment.
Differential Cover
1 Differential Cover Bolts
M8 x 1.25
1
Differential Cover Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even sealing.
Wheel Lug Nuts
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
545rfe Transmission
Torque specifications for 545rfe Transmission
545rfe Transmission
Torque specifications for 545rfe Transmission
Transmission Pan
1 Transmission Pan Bolts
M6 x 1.0
1
Transmission Pan Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts. Follow a crisscross pattern for even clamping.
Bellhousing
1 Bellhousing Bolts
M10 x 1.5
1
Bellhousing Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value is based on similar models. Follow a star pattern for even clamping.
Torque Converter
1 Torque Converter Bolts
M10 x 1.25
1
Torque Converter Bolts
M10 x 1.25
Torque Specification
38 ft-lbs (51 N·m)
Important Notes
Torque value is based on industry standards for M10 bolts. Ensure the flexplate is properly aligned.
Valve Body
1 Valve Body Bolts
M6 x 1.0
1
Valve Body Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on similar models. Over-tightening can damage the valve body.
Output Shaft
1 Output Shaft Nut
M24 x 1.5
1
Output Shaft Nut
M24 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Torque value is based on industry standards for large output shaft nuts.
Transmission Mount
1 Transmission Mount Bolts
M10 x 1.5
1
Transmission Mount Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value is based on similar models. Ensure proper alignment before tightening.
Transfer Case Adapter
1 Transfer Case Adapter Bolts
M8 x 1.25
1
Transfer Case Adapter Bolts
M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value is based on industry standards for M8 bolts.
Cooler Lines
1 Cooler Line Fittings
M12 x 1.5
1
Cooler Line Fittings
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is based on industry standards for flare fittings.
Shift Linkage
1 Shift Linkage Bolts
M8 x 1.25
1
Shift Linkage Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is based on similar models.
Fill Plug
1 Fill Plug
M18 x 1.5
1
Fill Plug
M18 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Torque value is based on industry standards for pipe thread plugs.
Drain Plug
1 Drain Plug
M18 x 1.5
1
Drain Plug
M18 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Torque value is based on industry standards for pipe thread plugs.
Transmission Case
1 Transmission Case Bolts
M8 x 1.25
1
Transmission Case Bolts
M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value is based on industry standards for M8 bolts. Follow a crisscross pattern for even clamping.
Solenoid Pack
1 Solenoid Pack Bolts
M6 x 1.0
1
Solenoid Pack Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on similar models. Over-tightening can damage the solenoid pack.
Crossmember
1 Crossmember Bolts
M12 x 1.75
1
Crossmember Bolts
M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value is based on similar models. Ensure proper alignment before tightening.
Dipstick Tube
1 Dipstick Tube Bolt
M6 x 1.0
1
Dipstick Tube Bolt
M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Torque value is based on industry standards for small mounting bolts.
6.7l Engine
Torque specifications for 6.7L Engine
6.7l Engine
Torque specifications for 6.7L Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
1. 110 ft-lbs (149 N·m)
2. 90°
Important Notes
Follow the manufacturer-recommended torque sequence to prevent warping.
Crankshaft
1 Main Bearing Cap Bolts
M10 x 1.25
1
Main Bearing Cap Bolts
M10 x 1.25
Torque Specification
1. 85 ft-lbs (115 N·m)
2. 90°
Important Notes
Follow the manufacturer-recommended torque sequence to ensure proper alignment.
2 Connecting Rod Bolts
M8 x 1.0
2
Connecting Rod Bolts
M8 x 1.0
Torque Specification
1. 45 ft-lbs (61 N·m)
2. 90°
Important Notes
Follow the manufacturer-recommended torque sequence to ensure proper alignment.
Flywheel
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
Important Notes
Ensure the flywheel is properly aligned before torquing.
Intake Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer-recommended torque sequence to prevent warping.
2 Exhaust Manifold Bolts
M10 x 1.25
2
Exhaust Manifold Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Follow the manufacturer-recommended torque sequence to prevent warping.
3 Turbocharger Mounting Bolts
M8 x 1.25
3
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on bolt size and application.
Oil System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer-recommended torque sequence to prevent leaks.
2 Oil Cooler Bolts
M6 x 1.0
2
Oil Cooler Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment of the oil cooler before torquing.
Valvetrain
1 Rocker Arm Bolts
M8 x 1.25
1
Rocker Arm Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper alignment of the rocker arms before torquing.
2 Camshaft Cap Bolts
M6 x 1.0
2
Camshaft Cap Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer-recommended torque sequence to ensure proper alignment.
3 Valve Cover Bolts
M6 x 1.0
3
Valve Cover Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Follow the manufacturer-recommended torque sequence to prevent leaks.
68rfe Transmission
Torque specifications for 68rfe Transmission
68rfe Transmission
Torque specifications for 68rfe Transmission
Transmission Pan
1 Transmission Pan Bolts
M6 x 1.0
1
Transmission Pan Bolts
M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Industry standard for M6 bolts. Follow a crisscross pattern for even clamping.
Valve Body
1 Valve Body Bolts
M6 x 1.0
1
Valve Body Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on M6 bolt size and typical valve body applications.
2 Solenoid Pack Bolts
M6 x 1.0
2
Solenoid Pack Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on M6 bolt size and solenoid pack applications.
Torque Converter
1 Torque Converter-to-Flexplate Bolts
M10 x 1.5
1
Torque Converter-to-Flexplate Bolts
M10 x 1.5
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Similar model (2012 RAM 3500) and industry standard for M10 bolts.
Bellhousing
1 Bellhousing Bolts
M10 x 1.5
1
Bellhousing Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Similar year (2015 RAM 3500) and industry standard for M10 bolts.
Output Shaft
1 Output Shaft Flange Bolts
M12 x 1.75
1
Output Shaft Flange Bolts
M12 x 1.75
Torque Specification
75 ft-lbs (101.7 N·m)
Important Notes
Estimated based on M12 bolt size and driveline applications.
Transmission Mount
1 Transmission Mount Bolts
M10 x 1.5
1
Transmission Mount Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Similar model (2010 RAM 3500) and industry standard for M10 bolts.
Transfer Case
1 Transfer Case Adapter Bolts
M8 x 1.25
1
Transfer Case Adapter Bolts
M8 x 1.25
Torque Specification
32.5 ft-lbs (44.1 N·m)
Important Notes
Estimated based on M8 bolt size and transfer case applications.
Cooling System
1 Transmission Cooler Line Fittings
M12 x 1.5
1
Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Industry standard for flare fittings.
Shift Linkage
1 Shift Linkage Bolts
M8 x 1.25
1
Shift Linkage Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated based on M8 bolt size and linkage applications.
Fluid Management
1 Transmission Fill Plug
M12 x 1.75
1
Transmission Fill Plug
M12 x 1.75
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Industry standard for threaded plugs.
2 Transmission Drain Plug
M12 x 1.75
2
Transmission Drain Plug
M12 x 1.75
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Industry standard for threaded plugs.
Internal Components
1 Parking Pawl Shaft Bolt
M8 x 1.25
1
Parking Pawl Shaft Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated based on M8 bolt size and parking pawl applications.
2 Transmission Case Bolts (Main Case)
M8 x 1.25
2
Transmission Case Bolts (Main Case)
M8 x 1.25
Torque Specification
27.5 ft-lbs (37.3 N·m)
Important Notes
Similar year (2016 RAM 3500) and industry standard for M8 bolts.
3 Transmission Filter Bolts
M6 x 1.0
3
Transmission Filter Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on M6 bolt size and filter applications.
Body
Torque specifications for Body
Body
Torque specifications for Body
Cab Mounting
1 Front Cab Mounting Bolts
M12 x 1.5
1
Front Cab Mounting Bolts
M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on similar models. Follow crisscross or star pattern for torque sequence.
2 Rear Cab Mounting Bolts
M12 x 1.5
2
Rear Cab Mounting Bolts
M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on similar models. Follow crisscross or star pattern for torque sequence.
Bed Mounting
1 Bed Mounting Bolts
M10 x 1.25
1
Bed Mounting Bolts
M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar models. Follow crisscross or star pattern for torque sequence.
Door Hinges
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for door hinge bolts.
Seat Belt Anchors
1 Seat Belt Anchor Bolts
M10 x 1.25
1
Seat Belt Anchor Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Industry standard for safety-critical fasteners.
Bumper Mounting
1 Front Bumper Mounting Bolts
M10 x 1.25
1
Front Bumper Mounting Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar models.
2 Rear Bumper Mounting Bolts
M10 x 1.25
2
Rear Bumper Mounting Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar models.
Radiator Support
1 Radiator Support Bolts
M8 x 1.25
1
Radiator Support Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for radiator support bolts.
Fenders
1 Fender Bolts
M6 x 1.0
1
Fender Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for fender bolts.
Hood Hinges
1 Hood Hinge Bolts
M8 x 1.25
1
Hood Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for hood hinge bolts.
Tailgate Hinges
1 Tailgate Hinge Bolts
M8 x 1.25
1
Tailgate Hinge Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for tailgate hinge bolts.
Spare Tire Carrier
1 Spare Tire Carrier Bolts
M10 x 1.25
1
Spare Tire Carrier Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Industry standard for spare tire carrier bolts.
Roof Rack
1 Roof Rack Bolts
M6 x 1.0
1
Roof Rack Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for roof rack bolts.
Mirrors
1 Mirror Mounting Bolts
M6 x 1.0
1
Mirror Mounting Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for mirror mounting bolts.
Fuel Door
1 Fuel Door Hinge Bolts
M5 x 0.8
1
Fuel Door Hinge Bolts
M5 x 0.8
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Industry standard for fuel door hinge bolts.
Grille
1 Grille Mounting Bolts
M6 x 1.0
1
Grille Mounting Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for grille mounting bolts.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Calipers
1 Caliper Mounting Bolts (Front and Rear)
M12 x 1.5
1
Caliper Mounting Bolts (Front and Rear)
M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value is an average of the range provided. Tighten bolts in a crisscross pattern to ensure even pressure.
2 Brake Pad Guide Pin Bolts (Front and Rear)
M8 x 1.25
2
Brake Pad Guide Pin Bolts (Front and Rear)
M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value is an average of the range provided. Ensure guide pins are properly lubricated before installation.
Rotors
1 Brake Disc (Rotor) Retaining Screws (Front and Rear)
M6 x 1.0
1
Brake Disc (Rotor) Retaining Screws (Front and Rear)
M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Torque value is an average of the range provided. These screws are primarily for assembly purposes and do not require high torque.
Hydraulics
1 Brake Hose Banjo Bolt (Front and Rear)
M10 x 1.0
1
Brake Hose Banjo Bolt (Front and Rear)
M10 x 1.0
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value is an average of the range provided. Use new sealing washers to prevent leaks.
2 Brake Line Fittings (Flare Nuts)
M10 x 1.0
2
Brake Line Fittings (Flare Nuts)
M10 x 1.0
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Torque value is an average of the range provided. Avoid over-tightening to prevent damage to the flare nuts.
3 Master Cylinder Mounting Bolts
M8 x 1.25
3
Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Torque value is an average of the range provided. Tighten bolts in a crisscross pattern to ensure even pressure.
4 Brake Fluid Reservoir Mounting Bolts
M6 x 1.0
4
Brake Fluid Reservoir Mounting Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the range provided. Ensure the reservoir is properly seated before tightening.
Parking Brake
1 Parking Brake Cable Bracket Bolts
M8 x 1.25
1
Parking Brake Cable Bracket Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average of the range provided. Ensure the cable is properly routed before tightening.
Wheels
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
135 ft-lbs (183 N·m)
Important Notes
Exact match for 2010-2018 Dodge RAM 3500. Tighten lug nuts in a star pattern to ensure even pressure.
Abs System
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is an average of the range provided. Ensure the sensor is properly seated before tightening.
Pedal Assembly
1 Brake Pedal Assembly Mounting Bolts
M8 x 1.25
1
Brake Pedal Assembly Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average of the range provided. Tighten bolts in a crisscross pattern to ensure even pressure.
Brake Booster
1 Brake Booster Mounting Bolts
M8 x 1.25
1
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average of the range provided. Tighten bolts in a crisscross pattern to ensure even pressure.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Driveshaft
1 Driveshaft U-Joint to Differential Flange Bolts
M12 x 1.25
1
Driveshaft U-Joint to Differential Flange Bolts
M12 x 1.25
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Industry standard for 12mm bolts with fine thread pitch. Ensure even torque application to prevent vibration.
2 Driveshaft Center Support Bearing Bolts
M10 x 1.5
2
Driveshaft Center Support Bearing Bolts
M10 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure proper alignment of the center support bearing.
3 Transmission Output Shaft Flange Bolts
M12 x 1.25
3
Transmission Output Shaft Flange Bolts
M12 x 1.25
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Industry standard for M12 bolts with fine thread pitch. Ensure flange is properly seated before torquing.
Differential
1 Differential Cover Bolts
M8 x 1.25
1
Differential Cover Bolts
M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure gasket is evenly compressed to prevent leaks.
2 Pinion Nut
M20 x 1.5
2
Pinion Nut
M20 x 1.5
Torque Specification
225 ft-lbs (305 N·m)
Important Notes
Industry standard for heavy-duty truck differentials. Ensure proper preload on pinion bearings.
3 Differential Carrier Bolts
M12 x 1.75
3
Differential Carrier Bolts
M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Industry standard for heavy-duty differentials. Ensure carrier is properly seated before torquing.
Axle
1 Axle Shaft Bolts
M12 x 1.75
1
Axle Shaft Bolts
M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure axle shaft is properly seated before torquing.
2 Rear Axle U-Bolt
M16 x 2.0
2
Rear Axle U-Bolt
M16 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure U-bolts are evenly torqued to prevent suspension misalignment.
Transfer Case
1 Transfer Case Mounting Bolts
M10 x 1.5
1
Transfer Case Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Industry standard for M10 bolts with coarse thread pitch. Ensure transfer case is properly aligned before torquing.
2 Transfer Case Output Shaft Nut
M24 x 2.0
2
Transfer Case Output Shaft Nut
M24 x 2.0
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Industry standard for heavy-duty transfer cases. Ensure output shaft is properly seated before torquing.
3 Transfer Case Shift Linkage Bolts
M8 x 1.25
3
Transfer Case Shift Linkage Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure shift linkage is properly aligned before torquing.
Transmission
1 Transmission Pan Bolts
M6 x 1.0
1
Transmission Pan Bolts
M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure gasket is evenly compressed to prevent leaks.
2 Transmission Bellhousing Bolts
M12 x 1.75
2
Transmission Bellhousing Bolts
M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Industry standard for M12 bolts with coarse thread pitch. Ensure proper alignment of the transmission and engine.
3 Transmission Crossmember Bolts
M10 x 1.5
3
Transmission Crossmember Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Similar year Dodge RAM 3500 specifications. Ensure crossmember is properly aligned before torquing.
Wheels
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
135 ft-lbs (183 N·m)
Important Notes
Exact match for 2010-2018 Dodge RAM 3500. Always use a calibrated torque wrench for safety-critical fasteners.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator
1 Alternator Mounting Bolts
M8 x 1.25
1
Alternator Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar models and industry standards for M8 bolts.
Starter Motor
1 Starter Motor Mounting Bolts
M10 x 1.5
1
Starter Motor Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value estimated based on similar models and industry standards for M10 bolts.
Battery System
1 Battery Terminal Clamp Bolts
M6 x 1.0
1
Battery Terminal Clamp Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Torque value based on industry standards for M6 bolts in battery applications.
2 Ground Strap Bolts
M6 x 1.0
2
Ground Strap Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical ground strap applications.
Fuse Box
1 Fuse Box Mounting Bolts
M6 x 1.0
1
Fuse Box Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical plastic housing applications.
2 Power Distribution Center (PDC) Mounting Bolts
M8 x 1.25
2
Power Distribution Center (PDC) Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Torque value estimated based on similar models and industry standards for M8 bolts.
Ignition System
1 Ignition Coil Mounting Bolts
M6 x 1.0
1
Ignition Coil Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value based on industry standards for M6 bolts in ignition coil applications.
2 ECU Mounting Bolts
M6 x 1.0
2
ECU Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical plastic housing applications.
Lighting System
1 Headlight Housing Mounting Bolts
M5 x 0.8
1
Headlight Housing Mounting Bolts
M5 x 0.8
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Torque value estimated based on M5 bolt size and typical plastic housing applications.
2 Trailer Wiring Connector Mounting Bolts
M6 x 1.0
2
Trailer Wiring Connector Mounting Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical trailer wiring applications.
Abs System
1 ABS Module Mounting Bolts
M8 x 1.25
1
ABS Module Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Torque value estimated based on similar models and industry standards for M8 bolts.
Cooling System
1 Electric Fan Mounting Bolts
M6 x 1.0
1
Electric Fan Mounting Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical fan mounting applications.
Power Steering
1 Power Steering Pump Mounting Bolts
M8 x 1.25
1
Power Steering Pump Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar models and industry standards for M8 bolts.
Wiper System
1 Wiper Motor Mounting Bolts
M6 x 1.0
1
Wiper Motor Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value estimated based on M6 bolt size and typical wiper motor applications.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Oxygen Sensor System
1 Oxygen Sensor (O2 Sensor) Mounting Bolt
M12 x 1.25
1
Oxygen Sensor (O2 Sensor) Mounting Bolt
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Use anti-seize compound on the sensor threads to prevent seizing. Torque value is an industry standard for M12x1.25 bolts in exhaust systems.
Exhaust Manifold System
1 Exhaust Manifold-to-Engine Block Bolts
M8 x 1.25
1
Exhaust Manifold-to-Engine Block Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Follow a crisscross torque sequence to ensure even pressure. Torque value is based on similar year Dodge RAM-3500 specifications.
Catalytic Converter System
1 Catalytic Converter Flange Bolts
M10 x 1.5
1
Catalytic Converter Flange Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Use new gaskets and inspect for warping before installation. Torque value is an industry standard for M10x1.5 bolts in exhaust systems.
Egr System
1 EGR Valve Mounting Bolts
M8 x 1.25
1
EGR Valve Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Use thread locker to prevent loosening due to vibration. Torque value is based on similar model (Dodge RAM-2500) specifications.
2 EGR Cooler Mounting Bolts
M10 x 1.5
2
EGR Cooler Mounting Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Inspect for leaks after installation. Torque value is estimated based on M10x1.5 bolt size and application.
Dpf System
1 DPF Mounting Bolts
M12 x 1.75
1
DPF Mounting Bolts
M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Follow manufacturer-recommended torque sequence if available. Torque value is estimated based on M12x1.75 bolt size and application.
Nox Sensor System
1 NOx Sensor Mounting Bolt
M10 x 1.25
1
NOx Sensor Mounting Bolt
M10 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Use anti-seize compound on the sensor threads. Torque value is an industry standard for M10x1.25 bolts in exhaust systems.
Exhaust Pipe System
1 Exhaust Pipe Clamp Bolts
M8 x 1.25
1
Exhaust Pipe Clamp Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Replace clamps if they show signs of wear or corrosion. Torque value is an industry standard for M8x1.25 bolts in exhaust systems.
2 Muffler Hanger Bolts
M8 x 1.25
2
Muffler Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Replace worn hangers to prevent stress on the exhaust system. Torque value is an industry standard for M8x1.25 bolts in exhaust systems.
Turbocharger System
1 Turbocharger-to-Exhaust Manifold Bolts
M10 x 1.5
1
Turbocharger-to-Exhaust Manifold Bolts
M10 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Use new gaskets and follow a crisscross torque sequence. Torque value is based on similar year Dodge RAM-3500 specifications.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold to Cylinder Head Bolts
M8 x 1.25
1
Exhaust Manifold to Cylinder Head Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in high-temperature applications. Follow a crisscross or star pattern for even clamping force.
2 Exhaust Manifold Heat Shield Bolts
M6 x 1.0
2
Exhaust Manifold Heat Shield Bolts
M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated value based on similar Dodge RAM models and industry standards for M6 bolts.
Exhaust Pipe And Flange
1 Exhaust Pipe to Manifold Flange Bolts
M10 x 1.5
1
Exhaust Pipe to Manifold Flange Bolts
M10 x 1.5
Torque Specification
27.5 ft-lbs (37.5 N·m)
Important Notes
Similar year Dodge RAM-3500 specifications. Follow a crisscross or star pattern for even clamping force.
2 Catalytic Converter to Exhaust Pipe Flange Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Flange Bolts
M10 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Industry standard for M10 bolts in exhaust applications. Follow a crisscross or star pattern for even clamping force.
Muffler And Clamp
1 Muffler to Exhaust Pipe Clamp Bolts
M8 x 1.25
1
Muffler to Exhaust Pipe Clamp Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Estimated value based on similar Dodge RAM models and industry standards for M8 bolts.
Exhaust Support
1 Exhaust Hanger Bracket Bolts
M8 x 1.25
1
Exhaust Hanger Bracket Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar Dodge RAM models and industry standards for M8 bolts.
2 Exhaust System Crossmember Bolts
M10 x 1.5
2
Exhaust System Crossmember Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar Dodge RAM models and industry standards for M10 bolts.
Oxygen Sensor
1 Oxygen Sensor (O2 Sensor)
M18 x 1.5
1
Oxygen Sensor (O2 Sensor)
M18 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Industry standard for oxygen sensor installations. Apply anti-seize compound to the threads to prevent seizing.
Turbocharger
1 Turbocharger to Exhaust Manifold Bolts
M8 x 1.25
1
Turbocharger to Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
27.5 ft-lbs (37.5 N·m)
Important Notes
Estimated value based on similar Dodge RAM models with turbocharged engines. Follow a crisscross or star pattern for even clamping force.
Heat Shields
1 Exhaust System Heat Shield Bolts
M6 x 1.0
1
Exhaust System Heat Shield Bolts
M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated value based on similar Dodge RAM models and industry standards for M6 bolts.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail System
1 Fuel Rail-to-Engine Bolts
M8 x 1.25
1
Fuel Rail-to-Engine Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value based on similar year (2010-2018 RAM-3500 diesel engines).
2 Fuel Rail Crossover Tube Bolts
M8 x 1.25
2
Fuel Rail Crossover Tube Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value based on similar year (2010-2018 RAM-3500 diesel engines).
3 Fuel Pressure Sensor Bolt
M6 x 1.0
3
Fuel Pressure Sensor Bolt
M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Torque value based on similar model (2010-2018 RAM-3500 Cummins diesel engines).
High Pressure Fuel Pump
1 High-Pressure Fuel Pump Mounting Bolts
M10 x 1.5
1
High-Pressure Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value based on industry standard for M10 bolts in high-pressure fuel systems.
2 Fuel Line Banjo Bolt
M12 x 1.5
2
Fuel Line Banjo Bolt
M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value based on industry standard for M12 banjo bolts.
Fuel Tank System
1 Fuel Tank Strap Bolts
M10 x 1.5
1
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value based on industry standard for M10 bolts in fuel tank applications.
2 Fuel Tank Skid Plate Bolts
M10 x 1.5
2
Fuel Tank Skid Plate Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value based on industry standard for M10 bolts in skid plate applications.
3 Fuel Tank Sending Unit Lock Ring
N/A (Hand-tighten)
3
Fuel Tank Sending Unit Lock Ring
N/A (Hand-tighten)
Torque Specification
1.
2. 90°
Important Notes
Hand-tighten plus 1/4 turn (90 degrees). Based on industry standard for fuel tank lock rings.
Fuel Filter And Pump
1 Fuel Filter Housing Bolts
M8 x 1.25
1
Fuel Filter Housing Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value based on similar year (2010-2018 RAM-3500 diesel engines).
2 Fuel Pump Module Mounting Bolts
M6 x 1.0
2
Fuel Pump Module Mounting Bolts
M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Torque value based on similar model (2010-2018 RAM-3500 Cummins diesel engines).
3 Fuel Pressure Regulator Bolts
M6 x 1.0
3
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Torque value based on similar model (2010-2018 RAM-3500 Cummins diesel engines).
Fuel Lines And Fittings
1 Fuel Line Quick-Connect Fittings
N/A (Hand-tighten)
1
Fuel Line Quick-Connect Fittings
N/A (Hand-tighten)
Torque Specification
N/A
Important Notes
Hand-tighten until fully seated. Based on industry standard for quick-connect fittings.
2 Fuel Tank Drain Plug
M14 x 1.5
2
Fuel Tank Drain Plug
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Torque value based on industry standard for M14 drain plugs.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Hvac Housing
1 HVAC Housing-to-Firewall Bolts
M8 x 1.25
1
HVAC Housing-to-Firewall Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-3500 HVAC system specifications. Follow a crisscross pattern for even pressure.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC applications.
2 Blower Motor Resistor Mounting Screws
M5 x 0.8
2
Blower Motor Resistor Mounting Screws
M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt size and typical electrical component applications.
Evaporator And Heater Core
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on similar model (Dodge RAM-2500) HVAC system specifications.
2 Heater Core Housing Bolts
M6 x 1.0
2
Heater Core Housing Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC applications.
Ac Compressor And Condenser
1 Compressor Mounting Bolts
M10 x 1.5
1
Compressor Mounting Bolts
M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-3500 A/C system specifications. Follow a crisscross pattern for even pressure.
2 Condenser Mounting Bolts
M8 x 1.25
2
Condenser Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-3500 A/C system specifications. Follow a crisscross pattern for even pressure.
3 A/C Line Flange Bolts
M8 x 1.25
3
A/C Line Flange Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-3500 A/C system specifications.
Expansion Valve
1 Expansion Valve Mounting Bolts
M6 x 1.0
1
Expansion Valve Mounting Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC applications.
Air Ducts
1 Air Duct Clamp Bolts
M6 x 1.0
1
Air Duct Clamp Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC applications.
Control Panel And Actuators
1 HVAC Control Panel Mounting Screws
M5 x 0.8
1
HVAC Control Panel Mounting Screws
M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt size and typical dashboard applications.
2 HVAC Blend Door Actuator Mounting Screws
M5 x 0.8
2
HVAC Blend Door Actuator Mounting Screws
M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt size and typical actuator applications.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Steering Knuckle
1 Upper Ball Joint to Steering Knuckle Bolt
M12 x 1.5
1
Upper Ball Joint to Steering Knuckle Bolt
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensures the ball joint is securely attached to the steering knuckle. Value based on similar year Dodge RAM 3500 specifications.
2 Lower Ball Joint to Steering Knuckle Bolt
M12 x 1.5
2
Lower Ball Joint to Steering Knuckle Bolt
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Critical for maintaining the connection between the lower control arm and steering knuckle. Value based on similar year Dodge RAM 3500 specifications.
3 Steering Knuckle to Axle Bolts
M14 x 1.5
3
Steering Knuckle to Axle Bolts
M14 x 1.5
Torque Specification
175 ft-lbs (237 N·m)
Important Notes
Critical for securing the steering knuckle to the axle. Value based on similar year Dodge RAM 3500 specifications.
Control Arms
1 Upper Control Arm to Frame Bolts
M14 x 1.5
1
Upper Control Arm to Frame Bolts
M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Secures the upper control arm to the frame. Value based on industry standards for heavy-duty trucks.
2 Lower Control Arm to Frame Bolts
M14 x 1.5
2
Lower Control Arm to Frame Bolts
M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Critical for maintaining the structural integrity of the suspension system. Value based on industry standards for heavy-duty trucks.
Shock Absorbers
1 Shock Absorber Upper Mounting Bolt
M10 x 1.5
1
Shock Absorber Upper Mounting Bolt
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensures the shock absorber is securely mounted to the frame. Value estimated based on bolt size.
2 Shock Absorber Lower Mounting Bolt
M12 x 1.5
2
Shock Absorber Lower Mounting Bolt
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Secures the shock absorber to the suspension component. Value based on similar year Dodge RAM 3500 specifications.
Track Bar
1 Track Bar Frame Mount Bolt
M14 x 1.5
1
Track Bar Frame Mount Bolt
M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Critical for maintaining proper axle alignment. Value based on similar year Dodge RAM 3500 specifications.
2 Track Bar Axle Mount Bolt
M14 x 1.5
2
Track Bar Axle Mount Bolt
M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Ensures the track bar is securely attached to the axle. Value based on similar year Dodge RAM 3500 specifications.
Sway Bar
1 Sway Bar Link Nut (Upper and Lower)
M10 x 1.5
1
Sway Bar Link Nut (Upper and Lower)
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Secures the sway bar link to the sway bar and control arm. Value estimated based on bolt size.
2 Sway Bar Bracket Bolts
M10 x 1.25
2
Sway Bar Bracket Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensures the sway bar is securely mounted to the frame. Value estimated based on bolt size.
Leaf Springs
1 Leaf Spring U-Bolts
M12 x 1.5
1
Leaf Spring U-Bolts
M12 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Critical for securing the leaf spring to the axle. Value based on industry standards for heavy-duty trucks.
2 Leaf Spring Front Eye Bolt
M16 x 1.5
2
Leaf Spring Front Eye Bolt
M16 x 1.5
Torque Specification
200 ft-lbs (271 N·m)
Important Notes
Secures the front of the leaf spring to the frame. Value based on similar year Dodge RAM 3500 specifications.
3 Leaf Spring Shackle Bolts
M16 x 1.5
3
Leaf Spring Shackle Bolts
M16 x 1.5
Torque Specification
200 ft-lbs (271 N·m)
Important Notes
Secures the rear of the leaf spring to the shackle. Value based on similar year Dodge RAM 3500 specifications.
Wheel Hub
1 Wheel Hub Assembly Bolts
M12 x 1.5
1
Wheel Hub Assembly Bolts
M12 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Critical for securing the wheel hub to the steering knuckle. Value based on similar year Dodge RAM 3500 specifications.
2 Wheel Lug Nuts
M14 x 1.5
2
Wheel Lug Nuts
M14 x 1.5
Torque Specification
140 ft-lbs (190 N·m)
Important Notes
Ensures the wheels are securely attached to the hub. Value sourced from the Dodge RAM 3500 owner's manual.
Steering Linkage
1 Tie Rod End to Steering Knuckle Nut
M14 x 1.5
1
Tie Rod End to Steering Knuckle Nut
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Secures the tie rod end to the steering knuckle. Value estimated based on bolt size.
2 Pitman Arm to Steering Gear Nut
M16 x 1.5
2
Pitman Arm to Steering Gear Nut
M16 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Critical for securing the pitman arm to the steering gear. Value based on similar year Dodge RAM 3500 specifications.
3 Drag Link to Pitman Arm Nut
M14 x 1.5
3
Drag Link to Pitman Arm Nut
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensures the drag link is securely attached to the pitman arm. Value estimated based on bolt size.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the recommended torque setting for the lug nuts on a 2010-2018 Dodge Ram-3500?
Q1
What IS the recommended torque setting for the lug nuts on a 2010-2018 Dodge Ram-3500?
Properly tighten the lug nuts to 150 ft-lb (203 N-m) using a calibrated torque wrench.
Q2 What IS the correct torque sequence for tightening the cylinder head bolts on a 2010-2018 Dodge Ram-3500?
Q2
What IS the correct torque sequence for tightening the cylinder head bolts on a 2010-2018 Dodge Ram-3500?
Follow the specific torque sequence and tightening specifications provided in the Dodge Ram-3500 service manual for your model year.
Q3 What type of torque wrench should I use for critical engine components on a 2010-2018 Dodge Ram-3500?
Q3
What type of torque wrench should I use for critical engine components on a 2010-2018 Dodge Ram-3500?
Use a high-quality, calibrated torque wrench that meets the accuracy requirements specified in the Dodge Ram-3500 service manual.
Q4 What are the torque specifications for the spark plugs on a 2010-2018 Dodge Ram-3500?
Q4
What are the torque specifications for the spark plugs on a 2010-2018 Dodge Ram-3500?
Tighten the spark plugs to the specified torque of 20-24 ft-lb (27-32 N-m) as per the Dodge Ram-3500 service manual.
Q5 IS it necessary to re-torque bolts after driving a certain distance?
Q5
IS it necessary to re-torque bolts after driving a certain distance?
Some bolts may require re-torquing after a specific break-in period. Refer to the Dodge Ram-3500 service manual for specific re-torque instructions.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Ram-3500.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Bolt Tightening Sequence for Cylinder Head
Technical procedure for tightening cylinder head bolts on a 2010-2018 Ram-3500.
- Clean all mating surfaces thoroughly.
- Apply a thin layer of engine oil to the threads of the bolts.
- Tighten the bolts to 20 Nm (15 ft-lb) in the sequence shown in the accompanying diagram.
- Re-tighten the bolts to 40 Nm (30 ft-lb) in the same sequence.
- Finally, tighten the bolts to 60 Nm (45 ft-lb) in the same sequence.
Lug Nut Tightening Procedure
Technical procedure for tightening lug nuts on a 2010-2018 Ram-3500.
- Place the vehicle on a flat, stable surface.
- Engage the parking brake.
- Use a torque wrench to tighten the lug nuts to 135 Nm (100 ft-lb).
- Tighten the lug nuts in a star pattern.
- Lower the vehicle.
Technical Service Bulletins
Technical Service Bulletin: Cylinder Head Bolt Failure
2016-06-15This bulletin addresses a potential issue with cylinder head bolt failure on 2010-2016 Ram-3500 models.
2010-2016 Ram-3500
Resolution: The resolution involves replacing the cylinder head bolts with updated bolts and following the revised torque specifications outlined in the bulletin.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.