Dodge Ram 2500 2010-2018 Torque Specifications
Dodge Ram 2500 2010-2018

Dodge Ram 2500 2010-2018 Torque Specifications

Complete Dodge Ram 2500 2010-2018 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

5.7l Engine

Torque specifications for 5.7L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 90 ft-lbs (122 N·m) 3. 90°
Important Notes
Follow the manufacturer's torque sequence to avoid warping the cylinder head.

Crankshaft Assembly

1

Main Bearing Cap Bolts

M10 x 1.25
Torque Specification
1. 80 ft-lbs (108 N·m) 2. 90°
Important Notes
Use a torque angle gauge for the final turn.
2

Connecting Rod Bolts

M8 x 1.0
Torque Specification
1. 45 ft-lbs (61 N·m) 2. 90°
Important Notes
Replace connecting rod bolts during reassembly; they are torque-to-yield (TTY) bolts.
3

Crankshaft Damper Bolt

M16 x 1.5
Torque Specification
240 ft-lbs (325 N·m)
Important Notes
Use a holding tool to prevent crankshaft rotation during tightening.

Intake Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow a crisscross torque sequence to avoid warping the manifold.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Use high-temperature thread locker to prevent loosening due to heat cycling.

Valvetrain

1

Rocker Arm Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Adjust valve lash before final torque.
2

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Use thread locker and ensure proper alignment during installation.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross torque sequence to ensure even sealing.
2

Oil Pump Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross torque sequence to ensure even sealing.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross torque sequence to ensure even sealing.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross torque sequence to ensure even sealing.

Ignition System

1

Spark Plugs

M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a torque wrench to avoid over-tightening and damaging the threads.

Transmission Assembly

1

Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Use thread locker and ensure proper alignment during installation.
2

Flywheel/Flexplate Bolts

M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Use thread locker and ensure proper alignment during installation.

Engine Mounts

1

Engine Mount Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Use thread locker and ensure proper alignment during installation.

545rfe Transmission

Torque specifications for 545rfe Transmission

Transmission Pan

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts. Follow a crisscross or star pattern for even clamping.

Bellhousing

1

Bellhousing Bolts

M10 x 1.25
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Torque value is based on similar models. Follow a crisscross pattern for even clamping.

Torque Converter

1

Torque Converter Bolts

M10 x 1.25
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Torque value is based on industry standards for M10 bolts. Follow a crisscross pattern for even clamping.

Valve Body

1

Valve Body Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts. Follow a crisscross pattern for even clamping.

Output Shaft

1

Output Shaft Nut

M20 x 1.5
Torque Specification
190 ft-lbs (257.6 N·m)
Important Notes
Torque value is based on similar models. Ensure the nut is fully seated before torquing.

Transmission Mount

1

Transmission Mount Bolts

M10 x 1.25
Torque Specification
42.5 ft-lbs (57.6 N·m)
Important Notes
Torque value is based on industry standards for M10 bolts. Follow a crisscross pattern for even clamping.

Transfer Case Adapter

1

Transfer Case Adapter Bolts

M10 x 1.25
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Torque value is based on similar models. Follow a crisscross pattern for even clamping.

Cooler Lines

1

Transmission Cooler Line Fittings

M12 x 1.75
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is based on industry standards for flare fittings.

Shift Linkage

1

Shift Linkage Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is based on industry standards for M8 bolts.

Dipstick Tube

1

Dipstick Tube Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts.

Crossmember

1

Crossmember Bolts

M12 x 1.75
Torque Specification
52.5 ft-lbs (71.2 N·m)
Important Notes
Torque value is based on similar models. Follow a crisscross pattern for even clamping.

Drain Plug

1

Drain Plug

M12 x 1.75
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is based on industry standards for M12 bolts.

Fill Plug

1

Fill Plug

M12 x 1.75
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is based on industry standards for M12 bolts.

Solenoid Pack

1

Solenoid Pack Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts. Follow a crisscross pattern for even clamping.

Transmission Case

1

Transmission Case Bolts

M8 x 1.25
Torque Specification
27.5 ft-lbs (37.3 N·m)
Important Notes
Torque value is based on similar models. Follow a crisscross pattern for even clamping.

6.7l Engine

Torque specifications for 6.7L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 110 ft-lbs (149 N·m) 2. 90° 3. 90°
Important Notes
Follow the manufacturer's specific torque sequence to avoid warping the cylinder head.

Crankshaft

1

Main Bearing Cap Bolts

M10 x 1.25
Torque Specification
1. 85 ft-lbs (115 N·m) 2. 90°
Important Notes
Ensure proper alignment of the crankshaft during installation.
2

Connecting Rod Bolts

M8 x 1.0
Torque Specification
1. 45 ft-lbs (61 N·m) 2. 90°
Important Notes
Ensure proper piston and connecting rod alignment.

Flywheel Flexplate

1

Flywheel/Flexplate Bolts

M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure the flywheel or flexplate is properly aligned before tightening.

Intake Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the intake manifold gasket is properly seated before tightening.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Turbocharger

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Cooler Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the oil cooler is properly aligned before tightening.

Valvetrain

1

Rocker Arm Shaft Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the rocker arm shaft is properly aligned before tightening.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Fuel System

1

Fuel Injector Hold-Down Bolts

M6 x 1.0
Torque Specification
24 ft-lbs (33 N·m)
Important Notes
Ensure the fuel injector is properly seated before tightening.
2

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.

Cooling System

1

Water Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the thermostat housing gasket is properly seated before tightening.

Miscellaneous

1

Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
240 ft-lbs (325 N·m)
Important Notes
Ensure the harmonic balancer is properly aligned before tightening.
2

Engine Mount Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure the engine is properly aligned before tightening.

68rfe Transmission

Torque specifications for 68rfe Transmission

Transmission Housing

1

Transmission Housing Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated based on industry standards for M10 bolts in transmission applications.

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.75
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Derived from similar Dodge RAM-2500 models (2010-2018).

Torque Converter

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Industry standard for M8 bolts in torque converter applications.

Transmission Pan

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated based on common M6 bolt torque values in similar applications.

Output Shaft

1

Output Shaft Bolts

M14 x 2.0
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Derived from similar Dodge RAM-2500 models (2010-2018).

Bell Housing

1

Bell Housing Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated based on industry standards for M12 bolts in bell housing applications.

Control Valve

1

Control Valve Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Industry standard for M6 bolts in valve applications.

Shift Lever

1

Shift Lever Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated based on common M8 bolt torque values in similar applications.

Transmission Filter

1

Transmission Filter Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Industry standard for M6 bolts in filter applications.

Transmission Cooler

1

Transmission Cooler Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated based on common M8 bolt torque values in cooler applications.

Transmission Seal

1

Transmission Seal Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Industry standard for M10 bolts in seal applications.

Transmission Pump

1

Transmission Pump Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated based on common M8 bolt torque values in pump applications.

Transmission Sensor

1

Transmission Sensor Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Industry standard for M6 bolts in sensor applications.

Transmission Bracket

1

Transmission Bracket Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Derived from similar Dodge RAM-2500 models (2010-2018).

Transmission Clutch

1

Transmission Clutch Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated based on industry standards for M10 bolts in clutch applications.

Body

Torque specifications for Body

Cab Mounting

1

Front Cab Mounting Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value estimated based on similar models. Follow a cross-pattern sequence for even clamping force.
2

Rear Cab Mounting Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value estimated based on similar models. Follow a cross-pattern sequence for even clamping force.

Bed Mounting

1

Bed Mounting Bolts

M10 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value based on industry standards for similar components.

Bumper Mounting

1

Front Bumper Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value estimated based on bolt size (M10 x 1.5).
2

Rear Bumper Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value estimated based on bolt size (M10 x 1.5).

Door And Tailgate

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value based on similar year Dodge RAM-2500 (2010-2018).
2

Tailgate Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value based on similar year Dodge RAM-2500 (2010-2018).

Radiator And Grille

1

Radiator Support Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value estimated based on bolt size (M8 x 1.25).
2

Grille Mounting Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Torque value estimated based on bolt size (M6 x 1.0).

Fender And Hood

1

Fender Mounting Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value estimated based on bolt size (M6 x 1.0).
2

Hood Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value based on similar year Dodge RAM-2500 (2010-2018).

Safety Critical

1

Seat Belt Anchor Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value based on industry standards for safety-critical fasteners.
2

Seat Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value based on similar year Dodge RAM-2500 (2010-2018).
3

Steering Column Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value estimated based on bolt size (M8 x 1.25).

Fuel And Spare Tire

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value based on similar year Dodge RAM-2500 (2010-2018).
2

Spare Tire Carrier Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value estimated based on bolt size (M10 x 1.5).

Brakes

Torque specifications for Brakes

Front Brakes

1

Caliper Mounting Bolts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Secures the brake caliper to the steering knuckle. Critical for preventing brake failure or misalignment.
2

Caliper Bracket Bolts

M12 x 1.75
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Attaches the caliper bracket to the steering knuckle. Critical for structural integrity and caliper stability.
3

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Connects the brake hose to the caliper. Ensures a leak-free seal and prevents brake fluid loss.
4

Brake Rotor Retaining Screws

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Holds the rotor in place during assembly. Over-torquing can strip threads; under-torquing may allow rotor movement.

Rear Brakes

1

Rear Axle Flange Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Secures the rear axle flange to the hub. Ensures axle and brake components remain securely attached.
2

Brake Pad Guide Pin Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Secures the guide pins that allow brake pads to move freely. Ensures smooth pad movement and even wear.

Master Cylinder And Booster

1

Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Secures the master cylinder to the brake booster. Ensures a tight seal and prevents fluid leaks.
2

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Secures the brake booster to the firewall. Ensures proper brake booster operation and prevents air leaks.

Parking Brake

1

Parking Brake Cable Bracket Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Secures the parking brake cable bracket to the chassis. Ensures proper parking brake operation.

Abs And Brake Lines

1

ABS Module Mounting Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Secures the ABS module to the vehicle frame. Ensures the module remains stable and functional. Estimated value based on bolt size and application.
2

Brake Line Fittings (Flare Nuts)

M10 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Connects brake lines to the master cylinder, ABS module, or calipers. Ensures a leak-free seal and system integrity.

Wheels

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Secures the wheel to the hub. Ensures proper wheel attachment and prevents uneven braking.

Drivetrain

Torque specifications for Drivetrain

Transmission Engine Interface

1

Transmission-to-Engine Mounting Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Source: Similar year (2010-2018 RAM-2500). Follow a star pattern for tightening sequence.
2

Transmission Bellhousing Bolts

M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Source: Similar year (2010-2018 RAM-2500). Ensure proper alignment before tightening.

Transfer Case

1

Transfer Case-to-Transmission Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Source: Industry standard for similar transfer case applications.
2

Transfer Case Mount-to-Frame Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Source: Industry standard for transfer case mounts.
3

Transfer Case Drain and Fill Plugs

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Source: Industry standard for transfer case plugs.

Driveshaft

1

Driveshaft-to-Differential Flange Bolts

M10 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Source: Similar model (Dodge RAM-3500).
2

U-Joint Strap Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Source: Industry standard for U-joint applications.

Differential

1

Rear Differential Cover Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Source: Industry standard for differential covers.
2

Rear Differential Pinion Flange Nut

M24 x 1.5
Torque Specification
200 ft-lbs (271 N·m)
Important Notes
Source: Similar model (Dodge RAM-3500).
3

Front Differential-to-Frame Bolts

M12 x 1.75
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated based on bolt size (M12x1.75) and application.

Axle Hub

1

Rear Axle Hub Nut

M24 x 1.5
Torque Specification
250 ft-lbs (339 N·m)
Important Notes
Estimated based on bolt size (M24x1.5) and application.
2

Front Axle Hub Nut

M20 x 1.5
Torque Specification
175 ft-lbs (237 N·m)
Important Notes
Estimated based on bolt size (M20x1.5) and application.

Transmission Mount

1

Transmission Mount-to-Frame Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Source: Industry standard for transmission mounts.

Electrical

Torque specifications for Electrical

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for M8 bolts in electrical components.
2

Alternator Bracket Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Similar model (Dodge RAM-1500) and industry standard for M10 bolts.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Similar model (Dodge RAM-1500) and industry standard for M10 bolts.
2

Starter Solenoid Terminal Nut

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for M8 terminal nuts.

Battery System

1

Battery Terminal Clamp Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Industry standard for battery terminal bolts.
2

Battery Tray Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for M8 bolts in battery tray applications.

Grounding System

1

Ground Strap Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for M8 bolts in grounding applications.
2

Ground Cable to Engine Block Bolt

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Similar model (Dodge RAM-1500) and industry standard for M10 bolts.

Electrical Components

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Estimated based on M6 bolt size and application.
2

Power Distribution Center (PDC) Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for M8 bolts in electrical enclosures.
3

Ignition Coil Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Industry standard for M6 bolts in ignition systems.
4

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Estimated based on M6 bolt size and application.
5

Headlight Housing Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Estimated based on M6 bolt size and application.
6

Wiring Harness Clamp Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Industry standard for M6 bolts in wiring harness applications.

Emissions Sensors

Torque specifications for Emissions_sensors

Oxygen Sensor System

1

Oxygen Sensor (O2 Sensor) Mounting Bolt

M12 x 1.25
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Use anti-seize compound on the sensor threads to prevent seizing.

Exhaust Manifold System

1

Exhaust Manifold-to-Head Bolts

M10 x 1.5
Torque Specification
1. 25 ft-lbs (33.9 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence to avoid warping the manifold.

Catalytic Converter System

1

Catalytic Converter Flange Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Ensure a leak-free connection for accurate emissions sensor operation.

Egr System

1

EGR Valve Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Estimated based on M8 x 1.25 bolt size and similar Dodge models.
2

EGR Cooler Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (29.8 N·m)
Important Notes
Estimated based on M8 x 1.25 bolt size and similar Dodge models.

Dpf System

1

DPF Mounting Bolts

M12 x 1.75
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Estimated based on M12 x 1.75 bolt size and similar Dodge RAM-2500 models.

Nox Sensor System

1

NOx Sensor Mounting Bolt

M12 x 1.25
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Use anti-seize compound on the sensor threads to prevent seizing.

Exhaust Pipe System

1

Exhaust Pipe Clamp Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Ensure a leak-free connection for accurate emissions sensor operation.
2

Muffler Hanger Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Prevents excessive vibration and potential damage to the exhaust system.

Turbocharger System

1

Turbocharger-to-Exhaust Manifold Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Follow the manufacturer's torque sequence to avoid warping or leaks.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque sequence: Start from the center and work outward to ensure even clamping force. Estimated value based on similar year Dodge RAM-2500 specifications.

Exhaust Flanges

1

Exhaust Manifold-to-Downpipe Flange Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated value based on industry standards for M10 bolts in exhaust applications.
2

Catalytic Converter Flange Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated value based on similar model Dodge RAM-2500 specifications.
3

Tailpipe Flange Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in exhaust flanges.

Exhaust Supports

1

Exhaust Pipe Clamp Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in exhaust clamps.
2

Muffler Hanger Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on M8 bolt size and application.
3

Exhaust System Hanger Bracket Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on M8 bolt size and application.

Heat Shields

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in heat shield applications.

Oxygen Sensor

1

Oxygen Sensor

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards for oxygen sensor installation. Apply anti-seize compound to the threads if recommended by the manufacturer.

Downpipe Support

1

Exhaust Downpipe-to-Transmission Support Bracket Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated value based on M10 bolt size and application.

Fuel

Torque specifications for Fuel

Fuel Rail System

1

Fuel Rail-to-Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper alignment of the fuel rail before tightening. Over-tightening can damage the fuel rail or manifold.
2

Fuel Injector Hold-Down Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Over-tightening can damage the injector or fuel rail. Ensure a proper seal to prevent leaks.
3

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on M6 bolt size and fuel system application.

Fuel Pump System

1

High-Pressure Fuel Pump Mounting Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure proper alignment of the pump before tightening. Over-tightening can damage the pump or engine block.
2

Fuel Pump Module Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on M6 bolt size and fuel pump applications.
3

Fuel Tank Sending Unit Lock Ring

N/A (Lock Ring)
Torque Specification
1. 2. 90°
Important Notes
Hand-tighten the lock ring, then turn an additional 1/4 turn (90 degrees) to secure.

Fuel Tank System

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening. Over-tightening can damage the straps or tank.
2

Fuel Tank Skid Plate Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure the skid plate is properly aligned with the frame before tightening.
3

Fuel Tank Drain Plug

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the drain plug is properly seated before tightening. Over-tightening can damage the tank threads.

Fuel Line System

1

Fuel Line Fittings (Banjo Bolts)

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper alignment of the fuel line before tightening. Over-tightening can damage the fitting or fuel line.
2

Fuel Line Clamp Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on M6 bolt size and fuel line applications.

Fuel Filter System

1

Fuel Filter Housing Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on M8 bolt size and fuel system application.

Hvac

Torque specifications for Hvac

Hvac Housing

1

HVAC Housing-to-Firewall Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on industry standards for M8 bolts in HVAC applications. Follow a crisscross or star pattern for even clamping force.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is estimated based on M6 bolt standards for HVAC components. Avoid over-tightening to prevent damage to the motor housing.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC housings.

Heater Core

1

Heater Core Housing Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC housings.

Control Panel

1

HVAC Control Panel Mounting Screws

M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt standards for interior components.

Compressor

1

Compressor Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value is based on similar models (Dodge RAM-1500) and industry standards for M10 bolts in A/C systems. Follow a crisscross or star pattern for even clamping force.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on industry standards for M8 bolts in A/C systems. Follow a crisscross or star pattern for even clamping force.

Refrigerant Lines

1

Refrigerant Line Flange Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in refrigerant line connections.

Ductwork

1

HVAC Ductwork Clamp Screws

M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt standards for ductwork applications. Avoid over-tightening to prevent damage to the ductwork.

Expansion Valve

1

Expansion Valve Mounting Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in A/C systems.

Pressure Switch

1

A/C Pressure Switch Bolt

M12 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is based on industry standards for M12 bolts in A/C systems.

Blend Door Actuator

1

HVAC Blend Door Actuator Screws

M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M5 bolt standards for interior components.

Suspension

Torque specifications for Suspension

Front Suspension

1

Upper Ball Joint Nut

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Secures the upper ball joint to the steering knuckle. Estimated value based on similar models.
2

Lower Ball Joint Nut

M14 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Secures the lower ball joint to the control arm. Estimated value based on similar models.
3

Shock Absorber Upper Mounting Nut

M10 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Secures the shock absorber to the vehicle frame. Estimated value based on industry standards.
4

Shock Absorber Lower Mounting Bolt

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Connects the shock absorber to the suspension component. Estimated value based on similar models.
5

Track Bar Frame Mount Bolt

M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Secures the track bar to the frame. Estimated value based on similar models.
6

Track Bar Axle Mount Bolt

M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Secures the track bar to the axle. Estimated value based on similar models.
7

Upper Control Arm Mounting Bolts

M14 x 1.5
Torque Specification
125 ft-lbs (170 N·m)
Important Notes
Secures the upper control arm to the frame and knuckle. Estimated value based on similar models.
8

Lower Control Arm Mounting Bolts

M16 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Secures the lower control arm to the frame and axle. Estimated value based on similar models.
9

Sway Bar Link Nuts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the sway bar links to the sway bar and suspension components. Estimated value based on industry standards.
10

Sway Bar Bracket Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the sway bar brackets to the frame. Estimated value based on industry standards.

Rear Suspension

1

Leaf Spring U-Bolts

M12 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Secures the leaf springs to the axle. Estimated value based on similar models.
2

Leaf Spring Front Eye Bolt

M16 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Secures the front of the leaf spring to the frame. Estimated value based on similar models.
3

Leaf Spring Shackle Bolts

M16 x 1.5
Torque Specification
190 ft-lbs (258 N·m)
Important Notes
Secures the rear of the leaf spring to the shackle. Estimated value based on similar models.

Steering

1

Tie Rod End Nut

M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Secures the tie rod end to the steering knuckle. Estimated value based on similar models.
2

Pitman Arm Nut

M18 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Secures the pitman arm to the steering gear. Estimated value based on similar models.
3

Steering Stabilizer Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the steering stabilizer to the axle and frame. Estimated value based on industry standards.

Wheels

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Secures the wheels to the hubs. Estimated value based on similar models.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the general torque specifications for the Dodge Ram 2500 (2010-2018)?

Refer to the provided tables for specific torque values based on component and bolt size. Ensure you have the correct torque wrench and follow proper tightening procedures.

Q2

How do I use a torque wrench to achieve accurate tightening?

Calibrate your torque wrench regularly. Clean and lubricate bolts before tightening. Gradually apply torque until the wrench clicks or reaches the specified value. Do not over-tighten.

Q3

Can I use a standard wrench or socket set for tightening bolts?

No, always use a properly calibrated torque wrench to ensure precise tightening. Standard tools can result in under- or over-tightening, compromising joint integrity.

Q4

What are the potential consequences of incorrect torque application?

Incorrect torque can lead to bolt failure, stripped threads, component damage, and safety hazards. Over-tightening can cause bolt breakage or component distortion, while under-tightening can result in loose connections and premature wear.

Q5

Where can I find additional torque specifications for my specific Dodge Ram 2500 model?

Consult the official Dodge Ram service manual or refer to reputable online resources. Always verify the torque values with a qualified mechanic if in doubt.

Q6

How often should I check or re-torque bolts on my Dodge Ram 2500?

Refer to the manufacturer's maintenance schedule or consult a mechanic. Critical bolts, such as those on suspension or steering components, may require periodic inspection and re-torquing.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench Set (10-200 Nm and 200-600 Nm)

Specifically designed for automotive applications, providing accurate torque measurements and preventative tightening for various components.

  • Wide torque ranges for different applications
  • Ratcheting mechanism for efficient operation
  • Durable construction ensures longevity
Learn more

Digital Angle Torque Adapter

Allows precise angle and torque measurements, crucial for components that require specific rotations after initial tightening.

  • Eliminates guesswork and ensures accurate tightening
  • Digital display for precise readings
  • Adjustable torque and angle settings
Learn more
Service Procedures

Bolt Torque Specifications for 2010-2018 Ram-2500

Comprehensive guide to tightening torques for various components on the Ram-2500, ensuring proper assembly and performance.

  • Detailed torque specifications for engine components (head bolts, camshaft bolts, etc.)
  • Tightening procedures for suspension components (control arms, tie rods, etc.)
  • Brake system torque values (calipers, rotors, wheel bolts)
  • Torques for driveline components (driveshaft bolts, differential bolts)
  • Body and interior component torque specifications (seat bolts, door hinges, etc.)
View full procedure
Technical Service Bulletins

Tighter Torque Specifications for Engine Head Bolts

2015-06-15

Addresses concerns regarding insufficient torque on engine head bolts in certain model years, providing updated torque specifications to ensure optimal engine performance and durability.

2014-2015 Ram-2500

Resolution: Revised torque specifications for engine head bolts, along with instructions for retorquing the bolts as necessary.

Rear Axle Nut Torque Adjustment

2017-04-20

Updates the torque specification for the rear axle nut on Ram-2500 trucks, ensuring proper preload and backlash within the axle assembly.

2016-2018 Ram-2500

Resolution: Adjusted torque value for the rear axle nut, with instructions for retorquing the nut to the specified value.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service