Dodge Ram 1500 1994-2001 Torque Specifications
Dodge Ram 1500 1994-2001

Dodge Ram 1500 1994-2001 Torque Specifications

Complete Dodge Ram 1500 1994-2001 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.9l Engine

Torque specifications for 3.9L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 65 ft-lbs (88 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence for even clamping force. Values are based on similar year Dodge RAM 1500 3.9L engine specifications.

Main Bearing Caps

1

Main Bearing Cap Bolts

M10 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Values are estimated based on industry standards for similar V6 engines.

Connecting Rods

1

Connecting Rod Bolts

M8 x 1.0
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Values are estimated based on similar engine designs.

Intake Manifold

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Values are based on similar year Dodge RAM 1500 specifications.

Exhaust Manifold

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Values are based on industry standards for cast iron manifolds.

Rocker Arms

1

Rocker Arm Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Values are estimated based on similar engine designs.

Oil Pan

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Values are based on similar year Dodge RAM 1500 specifications.

Timing Cover

1

Timing Cover Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Values are estimated based on similar engine designs.

Flywheel Flexplate

1

Flywheel/Flexplate Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Values are based on industry standards for similar engines.

Bellhousing

1

Bellhousing Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Values are based on similar year Dodge RAM 1500 specifications.

Water Pump

1

Water Pump Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Values are estimated based on similar engine designs.

Thermostat Housing

1

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Values are based on industry standards for similar components.

Valve Cover

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Values are based on similar year Dodge RAM 1500 specifications.

Spark Plug

1

Spark Plug

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Values are based on industry standards for spark plugs.

Harmonic Balancer

1

Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Values are estimated based on similar engine designs.

Engine Mounts

1

Engine Mount Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Values are based on similar year Dodge RAM 1500 specifications.

Fuel Rail

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Values are estimated based on similar engine designs.

Camshaft Sprocket

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Values are based on industry standards for similar engines.

Oil Pump

1

Oil Pump Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Values are estimated based on similar engine designs.

44re Transmission

Torque specifications for 44re Transmission

Transmission Pan

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Industry standard for M6 bolts with a 1.0 mm thread pitch.

Valve Body

1

Valve Body Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on similar transmission systems and M6 bolt sizes.

Torque Converter

1

Torque Converter-to-Flexplate Bolts

M10 x 1.5
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Similar year Dodge RAM 1500 specifications.

Bellhousing

1

Bellhousing-to-Engine Bolts

M12 x 1.75
Torque Specification
60 ft-lbs (81.3 N·m)
Important Notes
Similar year Dodge RAM 1500 specifications.

Output Shaft

1

Output Shaft Nut

M24 x 2.0
Torque Specification
190 ft-lbs (257.6 N·m)
Important Notes
Industry standard for large output shaft nuts.

Transmission Mount

1

Transmission Mount Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Estimated based on M10 bolt sizes and similar applications.

Transfer Case

1

Transfer Case-to-Transmission Bolts

M10 x 1.5
Torque Specification
32.5 ft-lbs (44.1 N·m)
Important Notes
Similar year Dodge RAM 1500 specifications.

Cooler Lines

1

Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Industry standard for flare fittings.

Stator Support

1

Stator Support Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated based on M8 bolt sizes and similar applications.

Dipstick Tube

1

Transmission Dipstick Tube Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on M6 bolt sizes.

Shift Linkage

1

Shift Linkage Bolts

M6 x 1.0
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Estimated based on M6 bolt sizes.

Crossmember

1

Transmission Crossmember Bolts

M12 x 1.75
Torque Specification
50 ft-lbs (67.8 N·m)
Important Notes
Similar year Dodge RAM 1500 specifications.

Fill Plug

1

Transmission Fill Plug

M18 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Industry standard for pipe thread plugs.

Drain Plug

1

Transmission Drain Plug

M18 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Industry standard for pipe thread plugs.

Overdrive Servo

1

Overdrive Servo Cover Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated based on M6 bolt sizes.

Internal Case

1

Transmission Case Bolts (Internal)

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated based on M8 bolt sizes.

Band Adjustment

1

Transmission Band Adjustment Locknut

M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated based on similar applications.

Oil Pump

1

Transmission Oil Pump Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated based on M6 bolt sizes.

Solenoid Pack

1

Transmission Solenoid Pack Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated based on M6 bolt sizes.

Rear Seal Retainer

1

Transmission Rear Seal Retainer Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated based on M6 bolt sizes.

46re Transmission

Torque specifications for 46re Transmission

Bellhousing

1

Bellhousing-to-Engine Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Follow a crisscross or star pattern for even clamping force.

Torque Converter

1

Torque Converter-to-Flexplate Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the torque converter is properly seated before tightening.

Transmission Pan

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Over-tightening can warp the pan or damage the gasket.

Valve Body

1

Valve Body Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the valve body is properly aligned before tightening.

Output Shaft

1

Output Shaft Nut

M24 x 1.5
Torque Specification
162 ft-lbs (220 N·m)
Important Notes
Estimated value based on bolt size and application.

Transfer Case

1

Transfer Case-to-Transmission Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Follow a crisscross or star pattern for even clamping force.

Transmission Mount

1

Transmission Mount Bolts

M12 x 1.75
Torque Specification
42 ft-lbs (57 N·m)
Important Notes
Estimated value based on bolt size and application.

Transmission Cooler Lines

1

Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Ensure fittings are properly aligned before tightening.

Stator Support

1

Stator Support Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on bolt size and application.

Transmission Case

1

Transmission Case Bolts

M10 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Follow a crisscross or star pattern for even clamping force.

Shift Lever

1

Shift Lever Bolt

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Ensure the shift lever is properly aligned before tightening.

Dipstick Tube

1

Transmission Dipstick Tube Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on bolt size and application.

Transmission Crossmember

1

Transmission Crossmember Bolts

M12 x 1.75
Torque Specification
42 ft-lbs (57 N·m)
Important Notes
Estimated value based on bolt size and application.

Transmission Fluid Filter

1

Transmission Fluid Filter Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the filter is properly aligned before tightening.

Speed Sensor

1

Transmission Speed Sensor Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.

47rh Transmission

Torque specifications for 47rh Transmission

Transmission Pan

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Tighten in a crisscross pattern to ensure even pressure. Value is an industry standard estimate for M6 bolts in transmission pans.

Torque Converter

1

Torque Converter-to-Flexplate Bolts

M10 x 1.5
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Value is based on similar models (Dodge RAM 1500, 1994-2001). Ensure the torque converter is fully seated before tightening.

Bellhousing

1

Bellhousing-to-Engine Bolts

M10 x 1.5
Torque Specification
60 ft-lbs (81.3 N·m)
Important Notes
Value is an industry standard estimate for M10 bolts in bellhousing applications. Tighten in a crisscross pattern.

Crossmember

1

Transmission-to-Crossmember Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Value is based on similar models (Dodge RAM 1500, 1994-2001).

Output Shaft

1

Output Shaft Yoke Nut

M20 x 1.5
Torque Specification
225 ft-lbs (305 N·m)
Important Notes
Value is an industry standard estimate for large yoke nuts in rear-wheel-drive applications.

Valve Body

1

Valve Body Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Value is an industry standard estimate for M6 bolts in valve body applications. Tighten in a crisscross pattern.

Cooler Lines

1

Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Value is an industry standard estimate for flare fittings in transmission cooler lines.

Shift Linkage

1

Shift Linkage Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Value is based on similar models (Dodge RAM 1500, 1994-2001).

Transmission Mount

1

Transmission Mount Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Value is based on similar models (Dodge RAM 1500, 1994-2001).

Stator Support

1

Stator Support Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Value is an industry standard estimate for M8 bolts in stator support applications. Tighten in a crisscross pattern.

Transmission Case

1

Transmission Case Bolts

M8 x 1.25
Torque Specification
27.5 ft-lbs (37.3 N·m)
Important Notes
Value is an industry standard estimate for M8 bolts in transmission case applications. Tighten in a crisscross pattern.

Dipstick Tube

1

Dipstick Tube Bolt

M6 x 1.0
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Value is an industry standard estimate for M6 bolts in dipstick tube applications.

Neutral Safety Switch

1

Neutral Safety Switch Bolt

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Value is an industry standard estimate for M6 bolts in switch applications.

Speed Sensor

1

Speed Sensor Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Value is an industry standard estimate for M6 bolts in sensor applications.

Fill Plug

1

Transmission Fill Plug

M12 x 1.75
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Value is an industry standard estimate for threaded plugs in transmission applications.

5.2l Engine

Torque specifications for 5.2L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 65 ft-lbs (88 N·m) 2. 90°
Important Notes
Use a torque-angle gauge for the final 90° turn. Follow the manufacturer's tightening sequence.

Main Bearing Caps

1

Main Bearing Cap Bolts

M10 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Apply engine oil to the threads and under the bolt heads before installation.

Connecting Rods

1

Connecting Rod Bolts

M8 x 1.0
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Replace bolts during engine rebuilds; they are torque-to-yield and should not be reused.

Intake Manifold

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Follow the manufacturer's tightening sequence to avoid warping the manifold.

Exhaust Manifold

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use new bolts if the old ones are corroded or damaged.

Rocker Arms

1

Rocker Arm Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Adjust valve lash before final torque.

Camshaft Sprocket

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Use thread locker on the bolt threads.

Harmonic Balancer

1

Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
Important Notes
Use a holding tool to prevent the crankshaft from rotating during installation.

Oil Pan

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Use a gasket sealant to ensure a proper seal.

Flywheel Flexplate

1

Flywheel/Flexplate Bolts

M10 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Use thread locker on the bolt threads.

Timing Cover

1

Timing Cover Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a gasket sealant to ensure a proper seal.

Water Pump

1

Water Pump Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a gasket sealant to ensure a proper seal.

Thermostat Housing

1

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a gasket sealant to ensure a proper seal.

Spark Plugs

1

Spark Plug Bolts

M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a torque wrench to avoid over-tightening.

Valve Cover

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Use a gasket sealant to ensure a proper seal.

Oil Pump

1

Oil Pump Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Use thread locker on the bolt threads.

Bellhousing

1

Bellhousing Bolts

M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Use thread locker on the bolt threads.

Engine Mounts

1

Engine Mount Bolts

M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Use thread locker on the bolt threads.

5.9l Engine

Torque specifications for 5.9L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 110 ft-lbs (149 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence to avoid warping the cylinder head.
2

Rocker Arm Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper valve operation by tightening evenly.

Crankshaft And Connecting Rods

1

Main Bearing Cap Bolts

M12 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Ensure proper crankshaft alignment by following the torque sequence.
2

Connecting Rod Bolts

M10 x 1.25
Torque Specification
1. 45 ft-lbs (61 N·m) 2. 90°
Important Notes
Ensure proper crankshaft and piston alignment.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Prevent vacuum leaks by following the torque sequence.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Prevent exhaust leaks by following the torque sequence.

Engine Accessories

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper belt tension and electrical operation.
2

Power Steering Pump Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper belt tension and steering operation.

Oil And Cooling

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Prevent oil leaks by following the torque sequence.
2

Water Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper coolant circulation by following the torque sequence.

8.0l Engine

Torque specifications for 8.0L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
1. 65 ft-lbs (88 N·m) 2. 90°
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Main Bearing Cap

1

Main Bearing Cap Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Connecting Rod

1

Connecting Rod Bolts

M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Intake Manifold

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Exhaust Manifold

1

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Flywheel Flexplate

1

Flywheel/Flexplate Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Harmonic Balancer

1

Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Oil Pan

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Valve Cover

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Timing Cover

1

Timing Cover Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Camshaft Sprocket

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Rocker Arm

1

Rocker Arm Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Spark Plug

1

Spark Plug

M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Industry standard for spark plugs.

Engine Mount

1

Engine Mount Bolts

M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Transmission Bellhousing

1

Transmission Bellhousing Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Water Pump

1

Water Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Thermostat Housing

1

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Fuel Rail

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Oil Pump

1

Oil Pump Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Crankshaft Pulley

1

Crankshaft Pulley Bolt

M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Torque Converter

1

Torque Converter Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated based on similar Dodge V10 engines and industry standards.

Body

Torque specifications for Body

Cab Mounting

1

Front Cab Mounting Bolts

M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards. Follow manufacturer's torque sequence for even clamping force.
2

Rear Cab Mounting Bolts

M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards. Follow manufacturer's torque sequence for even clamping force.

Bed Mounting

1

Bed Mounting Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards. Follow manufacturer's torque sequence for even clamping force.

Door Hinges

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for door hinge bolts in light-duty trucks.

Seat Belt Anchors

1

Seat Belt Anchor Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Industry standard for seat belt anchor bolts in light-duty trucks.

Bumper Mounting

1

Front Bumper Mounting Bolts

M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards. Follow manufacturer's torque sequence for even clamping force.
2

Rear Bumper Mounting Bolts

M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards. Follow manufacturer's torque sequence for even clamping force.

Fender Mounting

1

Fender Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for fender bolts in light-duty trucks.

Hood Hinges

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for hood hinge bolts in light-duty trucks.

Tailgate Hinges

1

Tailgate Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for tailgate hinge bolts in light-duty trucks.

Radiator Support

1

Radiator Support Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards.

Mirror Mounting

1

Mirror Mounting Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for mirror mounting bolts in light-duty trucks.

Fuel Tank Straps

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards.

Spare Tire Carrier

1

Spare Tire Carrier Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar Dodge RAM-1500 models and industry standards.

Grille Mounting

1

Grille Mounting Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for grille mounting bolts in light-duty trucks.

Wiper Motor Mounting

1

Wiper Motor Mounting Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Industry standard for wiper motor mounting bolts in light-duty trucks.

Steering Column Mounting

1

Steering Column Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Industry standard for steering column mounting bolts in light-duty trucks.

Dashboard Mounting

1

Dashboard Mounting Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Industry standard for dashboard mounting bolts in light-duty trucks.

Brakes

Torque specifications for Brakes

Front Brakes

1

Caliper Mounting Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).
2

Caliper Bracket Bolts

M12 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).
3

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value based on industry standard for banjo bolts.
4

Brake Rotor Retaining Screws

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value based on industry standard for rotor retaining screws.

Rear Brakes

1

Rear Brake Drum Adjuster Screw

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value based on industry standard for drum brake adjusters.
2

Rear Brake Backing Plate Bolts

M12 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).

Master Cylinder And Booster

1

Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).
2

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).

Parking Brake

1

Parking Brake Cable Bracket Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar Dodge models.

Wheels

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Important Notes
Torque value estimated based on similar year Dodge RAM 1500 (1994-2001).

Drivetrain

Torque specifications for Drivetrain

Engine Transmission Interface

1

Flywheel-to-Crankshaft Bolts

M10 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Industry standard for M10x1.5 bolts in this application. Estimated value based on similar models.
2

Pressure Plate-to-Flywheel Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated value based on similar models (1994-2001 Dodge RAM 2500).
3

Bellhousing-to-Engine Bolts

M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Industry standard for M12x1.75 bolts in this application. Estimated value.
4

Transmission-to-Bellhousing Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar models (1994-2001 Dodge RAM 2500).

Driveshaft

1

Driveshaft U-Joint Strap Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Industry standard for M8x1.25 bolts in this application. Estimated value.
2

Transfer Case Output Shaft Yoke Nut

M16 x 1.5
Torque Specification
175 ft-lbs (237 N·m)
Important Notes
Estimated value based on similar models (1994-2001 Dodge RAM 2500).

Rear Axle

1

Rear Axle Pinion Nut

M20 x 1.5
Torque Specification
225 ft-lbs (305 N·m)
Important Notes
Estimated value based on similar models (1994-2001 Dodge RAM 2500).
2

Rear Axle Carrier Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Industry standard for M12x1.75 bolts in this application. Estimated value.
3

Rear Axle Shaft Flange Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on similar models (1994-2001 Dodge RAM 2500).
4

Differential Cover Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Industry standard for M8x1.25 bolts in this application. Estimated value.

Front Axle

1

Front Axle Hub Assembly Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Industry standard for M12x1.75 bolts in this application. Estimated value.
2

Front Axle U-Joint Yoke Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Industry standard for M8x1.25 bolts in this application. Estimated value.

Transmission Mounting

1

Transfer Case Mounting Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Industry standard for M10x1.5 bolts in this application. Estimated value.
2

Transmission Crossmember Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Industry standard for M10x1.5 bolts in this application. Estimated value.

Transmission Fluid System

1

Transmission Pan Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Industry standard for M6x1.0 bolts in this application. Estimated value.

Electrical

Torque specifications for Electrical

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in electrical components. Follow a crisscross or star pattern for even clamping force.
2

Voltage Regulator Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in voltage regulator applications.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards for M10 bolts in starter applications. Follow a crisscross or star pattern for even clamping force.

Battery System

1

Battery Terminal Clamp Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in battery terminal applications.
2

Ground Strap Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in grounding applications.

Ignition System

1

Ignition Coil Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in ignition system applications.
2

Distributor Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in distributor applications.

Lighting System

1

Headlight Housing Mounting Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in headlight applications.
2

Wiper Motor Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards for M8 bolts in wiper motor applications.

Electrical Control System

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in fuse box applications.
2

Power Distribution Center (PDC) Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in PDC applications.
3

ECU (Engine Control Unit) Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in ECU applications.

Accessory System

1

Horn Mounting Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in horn applications.
2

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in blower motor applications.
3

Instrument Cluster Mounting Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on industry standards for M6 bolts in instrument cluster applications.

Emissions Sensors

Torque specifications for Emissions_sensors

Oxygen Sensor System

1

Oxygen Sensor (O2 Sensor) Mounting Bolt

M18 x 1.5
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Over-tightening can damage the sensor, while under-tightening can cause exhaust leaks.

Exhaust Manifold System

1

Exhaust Manifold-to-Head Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Use a crisscross torque sequence to ensure even clamping force.
2

Exhaust Pipe Flange Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Apply anti-seize compound to prevent galling.

Catalytic Converter System

1

Catalytic Converter Mounting Bolts

M12 x 1.75
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated based on M12 x 1.75 bolt size and similar Dodge models. Use a torque sequence to avoid warping the flange.

Egr System

1

EGR Valve Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Use a crisscross pattern for even clamping.
2

EGR Tube Nut (Connection to Exhaust Manifold)

3/8"-24
Torque Specification
22 ft-lbs (29.8 N·m)
Important Notes
Use a backup wrench to avoid twisting the tube.

Throttle Body System

1

Throttle Body Mounting Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Use a crisscross pattern for even clamping.

Pcv System

1

PCV Valve Mounting Bolt

1/4"-20
Torque Specification
10 ft-lbs (13.6 N·m)
Important Notes
Avoid over-tightening to prevent cracking the valve housing.

Air Injection System

1

Air Injection System Check Valve Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16.3 N·m)
Important Notes
Estimated based on M8 x 1.25 bolt size and similar applications. Use a crisscross pattern for even clamping.

Evap System

1

Evaporative Emissions Canister Mounting Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Use a crisscross pattern for even clamping.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold

1

Exhaust Manifold to Cylinder Head Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar year and industry standards for M8 bolts in exhaust applications.
2

Exhaust Manifold Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value estimated based on industry standards for M6 bolts in heat shield applications.

Exhaust Pipe And Flanges

1

Exhaust Pipe to Manifold Flange Bolts

M10 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value estimated based on similar model and industry standards for M10 bolts in exhaust flange applications.
2

Catalytic Converter to Exhaust Pipe Flange Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value estimated based on industry standards for M10 bolts in catalytic converter applications.
3

Exhaust System Flange Gasket Bolts

M10 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value estimated based on industry standards for M10 bolts in exhaust flange applications.

Muffler And Clamps

1

Muffler to Exhaust Pipe Clamp Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value estimated based on industry standards for M8 bolts in exhaust clamp applications.

Exhaust Support

1

Exhaust Hanger Bracket Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar year and industry standards for M8 bolts in hanger applications.
2

Exhaust System Crossmember Bolts

M12 x 1.75
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value estimated based on similar model and industry standards for M12 bolts in crossmember applications.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor)

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value estimated based on industry standards for oxygen sensor installations.

Heat Shields

1

Exhaust System Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value estimated based on industry standards for M6 bolts in heat shield applications.

Fuel

Torque specifications for Fuel

Fuel Tank

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Use a crisscross pattern when tightening to ensure even pressure on the straps.
2

Fuel Tank Skid Plate Bolts

M12 x 1.75
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Tighten in a crisscross pattern to ensure even pressure.
3

Fuel Tank Sending Unit Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated based on bolt size. Tighten evenly to avoid damaging the sending unit flange.

Fuel Pump

1

Fuel Pump Module Lock Ring

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Use a lock ring tool for proper installation and avoid overtightening.
2

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated based on bolt size. Tighten evenly to avoid warping the mounting flange.

Fuel Rail

1

Fuel Rail Bolts (5.2L/5.9L V8 Engines)

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Tighten in a crisscross pattern to ensure even pressure.
2

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Use a torque wrench to avoid overtightening, as the regulator housing is often made of plastic.
3

Fuel Injector Hold-Down Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Use a torque wrench to avoid overtightening, as the injectors are sensitive to excessive force.

Fuel Lines

1

Fuel Line Fittings (Banjo Bolts)

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Always replace the crush washers when reinstalling banjo bolts.
2

Fuel Line Clamp Bolts

M5 x 0.8
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Avoid overtightening, as it can damage the fuel lines.

Fuel Filter

1

Fuel Filter Housing Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated based on bolt size. Tighten evenly to avoid warping the housing.

Fuel Tank Drain

1

Fuel Tank Drain Plug

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a new gasket or sealant when reinstalling the drain plug.

Hvac

Torque specifications for Hvac

Heater Core

1

Heater Core Inlet/Outlet Tube Bolts

M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on industry standards for similar M6 bolts in HVAC systems. Tighten in a crisscross pattern to ensure even pressure distribution.

Blower Motor

1

Blower Motor Mounting Bolts

M5 x 0.8
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Torque value is estimated based on M5 bolt size and typical HVAC blower motor applications.
2

Blower Motor Resistor Mounting Screws

M4 x 0.7
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Torque value is estimated based on M4 screw size and typical resistor applications.

Hvac Housing

1

HVAC Housing-to-Firewall Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-1500 specifications for HVAC housing fasteners. Tighten in a crisscross pattern.
2

Evaporator Core Mounting Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in HVAC systems. Tighten in a crisscross pattern.

Ac System

1

Compressor Mounting Bolts

M8 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Torque value is based on similar year Dodge RAM-1500 specifications for compressor mounting bolts. Tighten in a crisscross pattern.
2

Condenser Mounting Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Torque value is estimated based on M6 bolt size and typical condenser applications. Tighten in a crisscross pattern.
3

A/C Line Flange Bolts

M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in A/C systems. Tighten in a crisscross pattern.
4

Expansion Valve Mounting Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Torque value is based on industry standards for M6 bolts in A/C systems. Tighten in a crisscross pattern.
5

A/C Pressure Switch Fitting

1/4" NPT
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Torque value is based on industry standards for 1/4" NPT fittings in A/C systems.

Ducting

1

HVAC Duct Clamp Screws

M4 x 0.7
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Torque value is estimated based on M4 screw size and typical duct clamp applications.

Control Panel

1

HVAC Control Panel Mounting Screws

M5 x 0.8
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is estimated based on M5 screw size and typical dashboard applications.

Suspension

Torque specifications for Suspension

Steering Knuckle

1

Upper Ball Joint to Steering Knuckle

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).
2

Lower Ball Joint to Steering Knuckle

M14 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).

Shock Absorber

1

Shock Absorber Upper Mount

M10 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is based on industry standard for M10 bolts in suspension applications.
2

Shock Absorber Lower Mount

M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).

Sway Bar

1

Front Sway Bar Link Nut

M10 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Torque value is based on industry standard for M10 bolts in suspension applications.
2

Front Sway Bar Bracket Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is based on industry standard for M8 bolts in suspension applications.

Control Arms

1

Upper Control Arm to Frame Bolts

M14 x 2.0
Torque Specification
1. 130 ft-lbs (176 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500). Tighten in a crisscross pattern.
2

Lower Control Arm to Frame Bolts

M16 x 2.0
Torque Specification
1. 160 ft-lbs (217 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500). Tighten in a crisscross pattern.

Steering

1

Tie Rod End to Steering Knuckle

M14 x 1.5
Torque Specification
55 ft-lbs (74.5 N·m)
Important Notes
Torque value is based on industry standard for M14 bolts in steering applications.

Wheels

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
1. 110 ft-lbs (149 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500). Tighten in a star pattern.

Strut Mount

1

Strut Mount to Body Bolts

M10 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is based on industry standard for M10 bolts in suspension applications.

Track Bar

1

Track Bar Frame Mount Bolt

M16 x 2.0
Torque Specification
160 ft-lbs (217 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).
2

Track Bar Axle Mount Bolt

M14 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).

Leaf Springs

1

Leaf Spring U-Bolts

M16 x 2.0
Torque Specification
1. 90 ft-lbs (122 N·m)
Important Notes
Torque value is based on industry standard for M16 U-bolts in suspension applications. Tighten in a crisscross pattern.
2

Leaf Spring Front Eye Bolt

M14 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).
3

Leaf Spring Shackle Bolts

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value is based on similar year (1994-2001 Dodge RAM 1500).

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque setting for the lug nuts on a 1994-2001 Dodge Ram 1500?

100 ft-lbs (136 Nm)

Q2

What type of torque wrench do I need to properly tighten automotive bolts?

A calibrated, click-type torque wrench with the appropriate range for the specified torque value

Q3

Can I use my cordless impact wrench to tighten critical bolts to specification?

No, impact wrenches can overtighten bolts and should not be used for precise torque applications

Q4

What IS the proper sequence for tightening lug nuts?

Tighten the lug nuts in a star pattern, starting with the nut directly opposite the valve stem

Q5

How often should I re-torque the bolts on my Dodge Ram 1500?

Re-torque critical bolts, such as lug nuts, after 500 miles (800 km) or as recommended in the owner's manual

Q6

Can I use a torque multiplier to increase the torque applied to a bolt?

Yes, torque multipliers can be used to increase torque, but they must be used in accordance with manufacturer's instructions and only within their rated capacity

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Ram-1500.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Cylinder Head Bolt Torque Sequence

Step-by-step guide to properly torque cylinder head bolts on the Dodge Ram-1500.

  • Clean all bolt threads and mating surfaces.
  • Lubricate bolt threads with engine oil.
  • Tighten bolts to 22 lb-ft (30 Nm) in the specified sequence (refer to service manual for diagram).
  • Further tighten bolts to 44 lb-ft (60 Nm) in the same sequence.
View full procedure

Front Axle Hub Nut Torque

Procedure for tightening the front axle hub nut on the Dodge Ram-1500.

  • Clean the hub and nut threads.
  • Apply a thin layer of anti-seize lubricant to the threads.
  • Tighten the nut to 195 lb-ft (265 Nm).
  • Install the cotter pin.
View full procedure

Rear Differential Pinion Nut Torque

Guide to setting the correct torque for the rear differential pinion nut on the Dodge Ram-1500.

  • Clean the pinion nut and threads.
  • Apply a small amount of gear oil to the threads.
  • Tighten the nut to 175 lb-ft (237 Nm).
  • Stake the nut to prevent loosening.
View full procedure
Technical Service Bulletins

Front Suspension Ball Joint Recall

2000-05-15

Recall notice for defective ball joints on certain model years of the Dodge Ram-1500.

1994-2001 Ram-1500

Resolution: Replace the affected ball joints with upgraded components. Refer to the bulletin for specific torque specifications.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service