Dodge Neon 1995-1999 Torque Specifications
Dodge Neon 1995-1999

Dodge Neon 1995-1999 Torque Specifications

Complete Dodge Neon 1995-1999 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.0l Engine

Torque specifications for 2.0L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
3

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper valve clearance before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper alignment.
2

Connecting Rod Nuts

M10 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure proper bearing clearance before tightening.
3

Flywheel Bolts

M12 x 1.75
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Ensure the flywheel is properly aligned before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the camshaft sprocket before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.
2

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.

Accessories

1

Starter Motor Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the starter motor before tightening.
2

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure proper belt tension before tightening.
3

Power Steering Pump Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper belt tension before tightening.

31th Transmission

Torque specifications for 31th Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent misalignment.
2

Transmission Crossmember Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure crossmember is properly aligned before tightening.

Transmission Fluid System

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure oil pan is properly sealed to prevent leaks.
2

Transmission Drain and Fill Plugs

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Avoid over-tightening to prevent thread damage.
3

Transmission Cooler Line Fittings

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure fittings are properly sealed to prevent leaks.

Drivetrain System

1

Drive Axle/Half Shaft Bolts

M12 x 1.75
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Ensure axles are securely connected to prevent drivetrain damage.
2

CV Joint/Axle Nut

M14 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
Important Notes
Ensure the CV joint is firmly attached to prevent wheel separation.

Starter System

1

Starter Motor Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure starter motor is aligned correctly to prevent damage to the transmission housing.

Bell Housing System

1

Bell Housing Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure bell housing is properly aligned before tightening.

Torque Converter System

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure torque converter is securely attached to prevent imbalance.

Shift Linkage System

1

Shift Linkage Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure shift linkage is properly aligned before tightening.

Body

Torque specifications for Body

Wheels And Tires

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Critical for safety and proper alignment. Always tighten in a star pattern.

Fuel System

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensures the fuel tank remains securely mounted. Critical for safety.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures a secure connection to prevent fuel leaks. Value converted from in-lbs.

Electrical System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Ensures a reliable electrical connection. Value converted from in-lbs.

Doors And Hinges

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures proper door alignment and operation. Estimated value based on similar components.

Seats

1

Seat Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Critical for passenger safety. Estimated value based on similar components.

Hood And Trunk

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures proper hood alignment and operation. Estimated value based on similar components.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures proper trunk lid alignment and operation. Estimated value based on similar components.

Bumpers

1

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures the bumper remains securely attached. Estimated value based on similar components.

Fenders

1

Fender Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures the fenders remain securely attached. Value converted from in-lbs.

Radiator Support

1

Radiator Support Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures the radiator remains securely mounted. Estimated value based on similar components.

Brakes

Torque specifications for Brakes

Brake Caliper

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the caliper is properly aligned before tightening.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Ensure the bracket is securely attached to prevent vibration during braking.

Brake Disc Drum

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the disc or drum is properly seated on the hub before tightening.

Brake Hydraulics

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the sealing washers are in good condition and properly seated.
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster.
3

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the booster is properly aligned with the firewall.
4

Brake Bleeder Screws

M7 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the bleeder screws are not overtightened to avoid damage.

Wheel Assembly

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Always use a star pattern when tightening wheel lug nuts to ensure even pressure.

Drivetrain

Torque specifications for Drivetrain

Engine Assembly

1

Flywheel Bolts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
These bolts secure the flywheel to the crankshaft.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
Important Notes
This bolt secures the harmonic balancer to the crankshaft.

Transmission Assembly

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
These bolts secure the transmission to the vehicle's chassis.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Important Notes
These bolts secure the transmission oil pan.
3

Transmission Drain and Fill Plugs

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
These plugs allow for the draining and filling of transmission fluid.

Drive Axle Assembly

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
These bolts secure the drive axles to the transmission or differential.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
Important Notes
This nut secures the CV joint to the wheel hub.

Drive Shaft Assembly

1

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
These bolts secure the drive shaft to the transmission and differential.

Differential Assembly

1

Differential Mounting Bolts

M10 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar components. These bolts secure the differential to the vehicle's chassis.
2

Differential Drain/Fill Plug

M6 x 1.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
This plug allows for the draining and filling of differential fluid.

Transfer Case Assembly

1

Transfer Case Mounting Bolts

M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar components. These bolts secure the transfer case to the vehicle's chassis.
2

Transfer Case Drain/Fill Plug

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
This plug allows for the draining and filling of transfer case fluid.

Clutch Assembly

1

Clutch Pressure Plate Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. These bolts secure the clutch pressure plate to the flywheel.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures a secure electrical connection and prevents arcing or misfires.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensures the starter is securely mounted and maintains proper alignment with the flywheel.

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensures the alternator is securely mounted and maintains proper belt tension.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Ensures a secure electrical connection, prevents corrosion, and avoids over-tightening.

Ac System

1

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures the compressor is securely mounted and maintains proper belt tension.
2

A/C Line Fittings

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensures a secure connection and prevents refrigerant leaks, which could affect electrical sensors.

Grounding System

1

Ground Strap Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. Ensures proper electrical grounding and prevents electrical issues.

Electrical Control System

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures the fuse box is securely mounted and maintains proper electrical connections.
2

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures the ECU is securely mounted and protected from vibration.
3

Wiring Harness Clamp Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures the wiring harness is securely fastened and maintains proper electrical connections.

Lighting System

1

Headlight Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensures the headlight housing is securely mounted and prevents misalignment.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure distribution.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the manifold is properly seated before tightening.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.

Intake System

1

Throttle Body Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the throttle body is properly aligned before tightening.
2

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure distribution.

Emissions Control

1

Oxygen Sensor (O2 Sensor) Mounting

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.
2

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the heat shield is properly aligned before tightening.
3

PCV Valve Mounting

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the PCV valve is properly seated before tightening.
4

Evaporative Emissions Canister Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the canister is properly aligned before tightening.
5

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the regulator is properly seated before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to prevent warping of the manifold.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust Hangers

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical exhaust hanger bolt sizes and applications.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor)

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure sensor is properly seated before tightening.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes and applications.

Fuel

Torque specifications for Fuel

Fuel Injector Rail System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Proper torque ensures a secure seal and prevents fuel leaks.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Proper torque ensures a secure seal and prevents fuel leaks.
3

Fuel Injector Rail Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Proper torque ensures the fuel rail remains stable and prevents fuel leaks.

Fuel Pump And Tank System

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Proper torque ensures the fuel pump is securely mounted and prevents fuel leaks.
2

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque ensures the fuel tank is securely mounted and prevents movement or leaks.
3

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Proper torque ensures a proper seal and prevents fuel vapor leaks.

Fuel Filter And Regulator System

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures the fuel filter is securely mounted and prevents fuel leaks.
2

Fuel Pressure Regulator Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Proper torque ensures the fuel pressure regulator is securely mounted and maintains correct fuel pressure.

Fuel Tank Accessory System

1

Fuel Tank Sender Unit Bolts

M8 x 1.25
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Proper torque ensures a proper seal and prevents fuel leaks.
2

Fuel Tank Drain Plug

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper torque ensures the drain plug is securely sealed and prevents fuel leaks.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
2

A/C Line Fittings

M8 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage fittings.

Hvac Blower Motor

1

HVAC Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar components. Ensure bolts are tightened evenly to avoid motor misalignment.

Hvac Control Panel

1

HVAC Control Panel Mounting Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar components. Avoid over-tightening to prevent damage to the control panel housing.

Hvac Evaporator Core

1

HVAC Evaporator Core Mounting Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components. Tighten bolts in a crisscross pattern to ensure even pressure.

Suspension

Torque specifications for Suspension

Strut Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure the vehicle is on a flat surface and the suspension is at ride height before torquing.
2

Lower Strut Mount Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar suspension components. Ensure proper alignment before torquing.
3

Upper Strut Mount Nuts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar suspension components. Ensure the strut is properly seated before torquing.

Control Arm Ball Joint

1

Control Arm Bolts

M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure the suspension is at ride height before torquing to avoid preloading the bushings.
2

Ball Joint Nut

M12 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure the ball joint is properly seated in the steering knuckle before torquing.

Steering System

1

Tie Rod End Nut

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the tie rod end is properly seated in the steering knuckle before torquing.
2

Steering Gear/Rack Bolts

M16 x 1.5
Torque Specification
125 ft-lbs (169 N·m)
Important Notes
Ensure the steering rack is properly aligned with the chassis before torquing.

Sway Bar

1

Sway Bar Link Nut

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the sway bar link is properly seated in the sway bar and suspension component before torquing.

Wheel Hub

1

Wheel Lug Nuts

M12 x 1.25
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Always use a star pattern when tightening wheel lug nuts to ensure even pressure on the wheel.

Rear Suspension

1

Rear Suspension Trailing Arm Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on similar suspension components. Ensure proper alignment before torquing.
2

Rear Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar suspension components. Ensure the suspension is at ride height before torquing.

Subframe

1

Subframe Mounting Bolts

M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Ensure the subframe is properly aligned with the chassis before torquing. Use a crisscross pattern for even tightening.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the torque specification for the lug nuts on a 1995-1999 Dodge neon?

The torque specification for the lug nuts on a 1995-1999 Dodge neon IS 100 ft-lbs.

Q2

What IS the torque specification for the spark plugs on a 1995-1999 Dodge neon?

The torque specification for the spark plugs on a 1995-1999 Dodge neon IS 20 ft-lbs.

Q3

What IS the torque specification for the oil filter on a 1995-1999 Dodge neon?

The torque specification for the oil filter on a 1995-1999 Dodge neon IS 25 ft-lbs.

Q4

What IS the torque specification for the drain plug on a 1995-1999 Dodge neon?

The torque specification for the drain plug on a 1995-1999 Dodge neon IS 30 ft-lbs.

Q5

What IS the torque specification for the alternator belt on a 1995-1999 Dodge neon?

The torque specification for the alternator belt on a 1995-1999 Dodge neon IS 60 ft-lbs.

Q6

What IS the torque specification for the water pump pulley on a 1995-1999 Dodge neon?

The torque specification for the water pump pulley on a 1995-1999 Dodge neon IS 40 ft-lbs.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the neon.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service