Dodge Journey 2009-2020 Torque Specifications
Dodge Journey 2009-2020

Dodge Journey 2009-2020 Torque Specifications

Complete Dodge Journey 2009-2020 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.4l Engine

Torque specifications for 2.4L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 21 ft-lbs (28 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence for cylinder head bolts. Failure to do so may result in head gasket failure.
2

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly aligned before torquing.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
63 ft-lbs (86 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure connecting rods are properly aligned before torquing.

Timing System

1

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure the timing marks are aligned before torquing.
2

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before torquing.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the specified torque sequence to ensure even sealing.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer to prevent leaks.

Intake And Exhaust

1

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Follow the specified torque sequence to ensure even sealing.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the exhaust manifold is properly aligned before torquing.

3.5l Engine

Torque specifications for 3.5L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 21 ft-lbs (28 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence to avoid warping the cylinder head.
2

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper alignment of rocker arms before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
63 ft-lbs (86 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper crankshaft alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Ensure proper alignment of the camshaft sprocket before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure a proper seal.
2

Oil Pump Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure proper alignment of the oil pump before tightening.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure a proper seal.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure a proper seal.

3.6l Engine

Torque specifications for 3.6L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 21 ft-lbs (28 N·m) 2. 90°
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
2

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
63 ft-lbs (86 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure connecting rods are properly seated before tightening.
3

Flywheel Bolts

M10 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Use thread locker on bolt threads.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.75
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Use thread locker on bolt threads.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even gasket compression.
2

Oil Filter Housing Bolt

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the housing is properly seated before tightening.
3

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Replace the crush washer with a new one during installation.

Intake And Exhaust

1

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even gasket compression.
2

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even gasket compression.

Cooling System

1

Water Pump Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even gasket compression.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even gasket compression.

Accessories

1

Serpentine/Accessory Drive Belt Tensioner Bolt

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.
3

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the alternator is properly aligned before tightening.

40tes Transmission

Torque specifications for 40tes Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.

Oil Pan

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a new gasket and ensure the pan surface is clean before installation.

Fluid Plugs

1

Transmission Drain and Fill Plugs

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug threads are clean and free of debris before installation.

Drive Axle

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the axle is fully seated before tightening.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Use a new axle nut and ensure the CV joint is properly seated.

Propeller Shaft

1

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensure the drive shaft is properly aligned before tightening.

Starter Motor

1

Starter Motor Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel.

Torque Converter

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the torque converter is properly seated before tightening.

Bellhousing

1

Transmission Bellhousing Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of the transmission and engine before tightening.

Shift Linkage

1

Transmission Shift Linkage Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the shift linkage is properly aligned before tightening.

Cooler Lines

1

Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the cooler lines are properly aligned before tightening.

Valve Body

1

Transmission Valve Body Bolts

M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Ensure the valve body is properly aligned before tightening.

62te Transmission

Torque specifications for 62te Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.

Oil Pan

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a new gasket and ensure the sealing surface is clean.

Fluid Plugs

1

Transmission Drain and Fill Plugs

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Replace the sealing washer if damaged or worn.

Drive Axle

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the axle is fully seated before tightening.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Use a new axle nut and stake it after tightening.

Propeller Shaft

1

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensure the drive shaft is properly aligned before tightening.

Starter Motor

1

Starter Motor Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.

Torque Converter

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the torque converter is fully seated before tightening.

Bell Housing

1

Transmission Bell Housing Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure proper alignment of the bell housing before tightening.

Valve Body

1

Transmission Valve Body Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve body is properly seated before tightening.
2

Transmission Solenoid Pack Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the solenoid pack is properly seated before tightening.

Shift Linkage

1

Transmission Shift Linkage Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the shift linkage is properly aligned before tightening.

Body

Torque specifications for Body

Fuel System

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure straps are evenly tightened to prevent fuel tank movement.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure a secure connection to prevent fuel leaks.

Electrical System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
9.17 ft-lbs (12 N·m)
Important Notes
Ensure terminals are clean and free of corrosion before tightening.

Engine Accessories

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure starter motor is properly aligned with the flywheel.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure alternator belt tension is adjusted after tightening.
3

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure compressor is properly aligned with the belt drive system.

Body Panels

1

Body Panel Bolts (e.g., fenders, doors, hood, trunk)

M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Avoid over-tightening to prevent panel damage.
2

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure bumper is properly aligned with the vehicle frame.
3

Door Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure door alignment is checked after tightening.

Interior Components

1

Seat Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Critical for passenger safety. Ensure seats are securely fastened.

Exterior Accessories

1

Roof Rack Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure roof rack is evenly tightened to prevent damage to the roof structure.
2

Spoiler/Wing Mounting Bolts

M6 x 1.0
Torque Specification
7.42 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Avoid over-tightening to prevent damage.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the caliper is properly aligned before torquing.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure the bracket is securely attached to the steering knuckle or axle.

Brake Rotor Drum System

1

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure the rotor or drum is properly seated on the hub before torquing.

Wheel Attachment System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Use a star pattern to ensure even torque distribution.

Hydraulic System

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the banjo bolt is properly aligned with the brake hose and caliper.
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster.
3

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the brake booster is properly aligned with the firewall.

Brake Pedal System

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the brake pedal operates smoothly after installation.

Abs System

1

ABS Sensor Mounting Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the ABS sensor is properly aligned with the wheel hub or steering knuckle.

Drivetrain

Torque specifications for Drivetrain

Engine Crankshaft

1

Flywheel Bolts

M10 x 1.25
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M12 x 1.5
Torque Specification
130 ft-lbs (177 N·m)
Important Notes
Ensure the crankshaft is properly secured before applying torque.

Transmission

1

Transmission Mounting Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
2

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening bolts.
3

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the transmission is cool before removing or installing plugs.

Drivetrain

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Ensure the axle is properly seated before applying torque.
3

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.

Differential

1

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the differential is cool before removing or installing plugs.
2

Differential Cover Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the differential cover gasket is properly seated before tightening bolts.

Transfer Case

1

Transfer Case Drain/Fill Plug

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the transfer case is cool before removing or installing plugs.
2

Transfer Case Mounting Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute torque.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Ensure proper torque to avoid damage to the coil or spark plug.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the starter motor is firmly mounted and aligned with the flywheel.

Charging System

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the alternator is correctly aligned with the drive belt.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
9.17 ft-lbs (12 N·m)
Important Notes
Proper torque ensures a solid electrical connection and prevents voltage drop or arcing.
2

Ground Strap Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Estimated value based on similar components. Proper torque ensures a reliable ground connection.

Electrical Control Modules

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
9.17 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Proper torque ensures the fuse box is securely mounted.
2

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
9.17 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Proper torque ensures the ECU is securely mounted.

Wiring Harness

1

Wiring Harness Clamp Bolts

M6 x 1.0
Torque Specification
9.17 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar components. Proper torque prevents chafing or damage to the wiring.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the EGR valve gasket is properly seated before tightening.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Use a crisscross pattern to ensure even clamping force.
2

Exhaust Manifold to Cylinder Head Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly aligned.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the exhaust pipe flange is properly aligned with the manifold.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the catalytic converter gasket is properly seated.

Throttle Body

1

Throttle Body Bolts

M6 x 1.0
Torque Specification
8.3 ft-lbs (11 N·m)
Important Notes
Ensure the throttle body gasket is properly aligned.

Oxygen Sensors

1

Oxygen Sensor (O2 Sensor) Mounting

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.

Evaporative Emissions

1

Evaporative Emissions Canister Purge Valve Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the purge valve is properly aligned before tightening.

Heat Shields

1

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the heat shield is properly aligned before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Use a new gasket to ensure a proper seal.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust Hangers

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure hangers are properly aligned before tightening.

Oxygen Sensors

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure sensor is properly seated before tightening.

Heat Shields

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
7.4 ft-lbs (10 N·m)
Important Notes
Ensure heat shield is properly aligned before tightening.

Exhaust Flanges

1

Exhaust Flange Bolts (Downpipe to Midpipe)

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.
4

High-Pressure Fuel Line Fittings

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.
5

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the regulator is properly seated before tightening.

Fuel Storage System

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure straps are evenly tensioned to avoid tank deformation.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the filler neck is properly aligned with the tank.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the sender unit is properly seated before tightening.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the filter is properly aligned with the fuel lines.
2

Fuel Line Quick-Connect Fittings

N/A (Quick-Connect)
Torque Specification
1. 2. 90°
Important Notes
Hand-tighten the fitting, then rotate an additional 1/4 turn (90 degrees) to secure.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (40 N-m)
Important Notes
Ensure the compressor is properly aligned before tightening. Torque values are estimated based on typical A/C compressor applications.
2

A/C Line Fittings

M8 x 1.25
Torque Specification
16 ft-lbs (22 N-m)
Important Notes
Ensure fittings are clean and free of debris before installation. Torque values are estimated based on typical A/C line applications.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque values are estimated based on typical evaporator core housing applications.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque values are estimated based on typical blower motor applications.

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque values are estimated based on typical heater core applications.

Hvac Case

1

HVAC Case Assembly Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Torque values are estimated based on typical HVAC case applications.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the strut or shock absorber to the chassis. Ensure proper alignment during installation.
2

Lower Strut Mounting Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar components. Secures the lower end of the strut to the steering knuckle or control arm.
3

Upper Strut Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the upper strut mount to the chassis. Ensure proper alignment during installation.
4

Control Arm Bolts

M14 x 1.5
Torque Specification
1. 85 ft-lbs (115 N·m)
Important Notes
Secures the control arm to the chassis. Follow the specified torque sequence to ensure even clamping force.
5

Ball Joint Nut

M12 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Secures the ball joint to the control arm and steering knuckle. Ensure proper alignment during installation.
6

Tie Rod End Nut

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Secures the tie rod end to the steering knuckle. Ensure proper alignment during installation.
7

Sway Bar Link Nut

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the sway bar link to the sway bar and suspension. Ensure proper alignment during installation.
8

Steering Gear/Rack Bolts

M12 x 1.5
Torque Specification
1. 74 ft-lbs (100 N·m)
Important Notes
Secures the steering rack to the chassis. Follow the specified torque sequence to ensure even clamping force.

Rear Suspension

1

Rear Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the rear shock absorbers to the chassis and suspension components. Ensure proper alignment during installation.
2

Rear Sway Bar Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the rear sway bar to the chassis. Ensure proper alignment during installation.
3

Rear Control Arm Bolts

M14 x 1.5
Torque Specification
1. 85 ft-lbs (115 N·m)
Important Notes
Secures the rear control arms to the chassis and suspension components. Follow the specified torque sequence to ensure even clamping force.
4

Rear Trailing Arm Bolts

M14 x 1.5
Torque Specification
1. 85 ft-lbs (115 N·m)
Important Notes
Secures the rear trailing arms to the chassis and suspension components. Follow the specified torque sequence to ensure even clamping force.

Wheels

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
1. 100 ft-lbs (135 N·m)
Important Notes
Secures the wheels to the hubs. Follow the specified torque sequence to ensure even clamping force.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 2017 Dodge Journey?

100 ft-lbs (135 Nm)

Q2

What IS the proper torque for the oil drain plug on a 2019 Dodge Journey?

23 ft-lbs (31 Nm)

Q3

Can I use an impact wrench to tighten suspension bolts?

No, impact wrenches should not be used on suspension bolts. Excessive force can damage the bolts or components.

Q4

What type of torque wrench should I use for engine head bolts?

Use a high-quality, calibrated torque wrench with a click-style or digital readout.

Q5

What are the consequences of over-tightening a torque bolt?

Over-tightening can stretch or break the bolt, damage threads, or cause premature failure of the component.

Q6

What IS the recommended torque for the spark plugs on a 2020 Dodge Journey?

22 ft-lbs (30 Nm)

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Journey.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Bolts Torque Specifications for Dodge journey (2009-2020)

This technical resource provides detailed torque specifications for various bolts and fasteners used in 2009-2020 Dodge Journey vehicles. Refer to specific repair procedures for individual component guidelines.

  • Locate the specific bolt or fastener in the vehicle.
  • Identify the corresponding torque specification in the provided table or diagram.
  • Use a digital torque wrench to tighten the bolt or fastener to the specified torque, ensuring accuracy and preventing damage.
  • Follow all safety precautions and wear appropriate protective gear while performing any mechanical work.
View full procedure
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service