Dodge Dakota 2005-2011 Torque Specifications
Dodge Dakota 2005-2011

Dodge Dakota 2005-2011 Torque Specifications

Complete Dodge Dakota 2005-2011 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.7l Engine

Torque specifications for 3.7L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 23 ft-lbs (31 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Rocker Arms/Shafts Bolts

M8 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure rocker arms are properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Follow the manufacturer's specified torque sequence.
2

Connecting Rod Nuts

M9 x 1.0
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure connecting rods are properly aligned before tightening.

Flywheel And Harmonic Balancer

1

Flywheel Bolts

M12 x 1.75
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Use thread locker on flywheel bolts.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Ensure the harmonic balancer is fully seated before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated.
2

Oil Drain Plug

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Replace the crush washer during installation.

Valve Cover And Intake

1

Valve Cover Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the valve cover gasket is properly seated.
2

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the intake manifold gasket is properly seated.

4.7l Engine

Torque specifications for 4.7L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper torque sequence to prevent head gasket failure.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure even tightening to prevent warping of the valve cover.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Ensure proper torque sequence to maintain crankshaft alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure proper torque to prevent rod bearing failure.
3

Flywheel Bolts

M12 x 1.75
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper torque sequence to maintain engine balance.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure proper tension on the timing belt/chain.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper torque to maintain engine timing.
3

Crankshaft Pulley/Harmonic Balancer Bolt

M12 x 1.75
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Ensure proper torque to maintain engine balance.

Intake And Exhaust

1

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure even tightening to prevent vacuum leaks.
2

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure even tightening to prevent exhaust leaks.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure even tightening to prevent oil leaks.
2

Oil Drain Plug Bolt

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper torque to prevent oil leaks.

Accessories

1

Starter Motor Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper torque to prevent starter misalignment.
2

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper torque to prevent alternator misalignment.
3

Power Steering Pump Mounting Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper torque to prevent pump misalignment.

45rfe Transmission

Torque specifications for 45rfe Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.

Oil Pan

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a new gasket and ensure the pan surface is clean before installation.

Fluid Management

1

Transmission Drain Plug

M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the plug is properly seated to prevent leaks.
2

Transmission Fill Plug

M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the plug is properly seated to prevent leaks.
3

Transmission Cooler Line Fittings

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure fittings are properly aligned to prevent leaks.

Drivetrain Connection

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure proper alignment of the axles before tightening.
2

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure proper alignment of the driveshaft before tightening.

Starter Motor

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the starter motor before tightening.

Torque Converter

1

Torque Converter Bolts

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure proper alignment of the torque converter before tightening.

Bell Housing

1

Transmission Bell Housing Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the bell housing before tightening.

Valve Body

1

Transmission Valve Body Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper alignment of the valve body before tightening.
2

Transmission Solenoid Pack Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper alignment of the solenoid pack before tightening.

Body

Torque specifications for Body

Fuel System

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Converted from in-lbs to ft-lbs for consistency. Ensure no cross-threading during installation.

Engine Accessories

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the starter motor before tightening.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper belt alignment after tightening.
3

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure proper belt alignment after tightening.
4

Power Steering Pump Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper belt alignment after tightening.

Electrical System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Converted from in-lbs to ft-lbs for consistency. Ensure clean and corrosion-free terminals.

Body Structure

1

Body Mount Bolts

M12 x 1.75
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on typical body mount bolt specifications. Follow the manufacturer's recommended torque sequence.
2

Door Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on typical door hinge bolt specifications. Ensure proper door alignment before tightening.
3

Seat Belt Anchor Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on typical seat belt anchor bolt specifications. Critical for passenger safety.
4

Radiator Support Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical radiator support bolt specifications. Ensure proper alignment of the radiator.
5

Fender Bolts

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on typical fender bolt specifications. Ensure proper panel alignment before tightening.
6

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on typical bumper mounting bolt specifications. Ensure proper alignment of the bumper.
7

Hood Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on typical hood hinge bolt specifications. Ensure proper hood alignment before tightening.
8

Tailgate Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on typical tailgate hinge bolt specifications. Ensure proper tailgate alignment before tightening.

Brakes

Torque specifications for Brakes

Brake Caliper

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the caliper is properly aligned before torquing.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
These bolts must be torqued to specification to withstand braking forces.

Brake Rotor Drum

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Ensure the rotor or drum is seated properly before torquing.

Brake Hydraulics

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the sealing washers are properly seated before torquing.
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the master cylinder is properly aligned before torquing.
3

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the brake booster is properly aligned before torquing.
4

Brake Line Fittings

M10 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fittings are properly aligned and seated before torquing.

Wheel Assembly

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Always use a crisscross pattern when tightening lug nuts.

Drivetrain

Torque specifications for Drivetrain

Engine And Flywheel

1

Flywheel Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper alignment of the flywheel before tightening. Torque in a star pattern.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Ensure the harmonic balancer is seated properly before tightening.

Transmission

1

Transmission Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the transmission is properly aligned before tightening.
2

Transmission Oil Pan Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
3

Transmission Drain and Fill Plugs

M12 x 1.75
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the threads are clean and free of debris before installation.

Driveshaft And Axles

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the axle is properly seated before tightening.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
Important Notes
Ensure the CV joint is properly seated before tightening.
3

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the drive shaft is properly aligned before tightening.

Differential And Transfer Case

1

Differential Drain/Fill Plug

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the threads are clean and free of debris before installation.
2

Transfer Case Drain/Fill Plug

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the threads are clean and free of debris before installation.
3

Transfer Case Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the transfer case is properly aligned before tightening.
4

Differential Cover Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the differential cover gasket is properly seated before tightening.
5

Transfer Case Output Shaft Flange Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the output shaft flange is properly aligned before tightening.
6

Transfer Case Input Shaft Flange Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the input shaft flange is properly aligned before tightening.

Wheels And Hubs

1

Wheel Hub/Bearing Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure the wheel hub is properly seated before tightening.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel before tightening.

Charging System

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the alternator is properly aligned with the belt before tightening.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Avoid over-tightening to prevent damage to the terminals.

Ac System

1

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the compressor is properly aligned with the belt before tightening.
2

A/C Line Fittings

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the fittings are properly seated before tightening.

Grounding System

1

Ground Strap Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the ground strap is properly seated before tightening.

Fuse And Relay System

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the fuse box is properly seated before tightening.

Electrical Connectors

1

Electrical Connector Bolts

M6 x 1.0
Torque Specification
5.83 ft-lbs (8 N·m)
Important Notes
Avoid over-tightening to prevent damage to the connectors.

Engine Control System

1

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the ECU is properly seated before tightening.

Lighting System

1

Headlight Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the headlight housing is properly aligned before tightening.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold And Headers

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Exhaust Pipe And Catalytic Converter

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure proper alignment before tightening.

Emissions Control Components

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper alignment before tightening.
2

Throttle Body Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure proper alignment before tightening.
3

Intake Manifold Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Tighten bolts in a crisscross pattern to evenly distribute pressure.

Sensors And Auxiliary Components

1

O2 Sensor Mounting Nut

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
2

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the heat shield is properly aligned before tightening.
3

PCV Valve Mounting Bolt

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the PCV valve is properly seated before tightening.
4

Evaporative Emissions Canister Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the canister is properly aligned before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust Hangers

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor)

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on typical M18 bolt torque specifications.

Heat Shields

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value based on typical M6 bolt torque specifications.

Exhaust Flanges

1

Exhaust Flange Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Rail System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure injectors are properly seated in the fuel rail and intake manifold.

Fuel Pump And Tank System

1

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the fuel pump is properly seated in the fuel tank.
2

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the fuel tank is properly supported before tightening.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the sender unit is properly seated in the fuel tank.

Fuel Delivery System

1

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.
2

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the fuel filter is properly seated before tightening.
3

Fuel Line Fittings

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the fuel line fittings are properly aligned before tightening.

Fuel Pressure Regulation System

1

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the fuel pressure regulator is properly seated before tightening.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (41 N-m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

A/C Line Fittings

M8 x 1.25
Torque Specification
20 ft-lbs (27 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening to prevent leaks.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Ensure the housing is properly sealed to prevent refrigerant leaks.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Ensure the blower motor is securely mounted to prevent vibrations and noise.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
20 ft-lbs (27 N-m)
Important Notes
Ensure fittings are clean and free of debris before tightening to prevent leaks.

Hvac Case

1

HVAC Case/Assembly Bolts

M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N-m)
Important Notes
Ensure the case is securely assembled to prevent air leaks and maintain proper airflow distribution.

Suspension

Torque specifications for Suspension

Strut Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper alignment before torquing.
2

Shock Absorber Lower Mounting Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar components.

Control Arms

1

Control Arm Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure proper alignment before torquing.
2

Lower Control Arm to Frame Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar components.
3

Upper Control Arm to Frame Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar components.

Steering Components

1

Ball Joint Nut

M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure the ball joint is properly seated before torquing.
2

Tie Rod End Nut

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the tie rod end is properly aligned before torquing.
3

Steering Knuckle to Strut Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar components.

Sway Bar

1

Sway Bar Link Nut

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Ensure the sway bar link is properly aligned before torquing.
2

Sway Bar Bracket Bolts

M8 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components.

Wheel Hub

1

Wheel Hub/Bearing Bolts

M12 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Ensure the wheel hub is properly seated before torquing.
2

Wheel Lug Nuts

M12 x 1.5
Torque Specification
1. 95 ft-lbs (129 N·m)
Important Notes
Always use a star pattern when tightening lug nuts.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque specification for the lug nuts on a 2005-2011 Dodge Dakota?

The recommended torque specification for the lug nuts on a 2005-2011 Dodge Dakota IS 115 ft-lbs (155 Nm).

Q2

What type of torque wrench should I use to tighten the lug nuts on my Dodge Dakota?

It IS recommended to use a torque wrench that IS specifically calibrated for automotive use. This will ensure that the lug nuts are tightened to the correct specification.

Q3

How often should I check the torque on the lug nuts of my Dodge Dakota?

It IS recommended to check the torque on the lug nuts of your Dodge Dakota every time you rotate the tires or have any other work done on the suspension or brakes.

Q4

What are the consequences of not properly tightening the lug nuts on my Dodge Dakota?

Not properly tightening the lug nuts can lead to a number of safety hazards, including the wheel coming loose and causing an accident.

Q5

Can I use a breaker bar to tighten the lug nuts on my Dodge Dakota?

It IS not recommended to use a breaker bar to tighten the lug nuts on your Dodge Dakota. This can damage the lug nuts and/or the threads on the wheel studs.

Q6

What IS the torque specification for the oil drain plug on a 2005-2011 Dodge Dakota?

The torque specification for the oil drain plug on a 2005-2011 Dodge Dakota IS 25 ft-lbs (34 Nm).

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

This digital torque wrench provides precise torque measurements and audible feedback to ensure proper tightening of fasteners, preventing damage to components.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Reversible ratcheting mechanism for easy use
Learn more
Service Procedures

Engine Component Bolt Torque Specifications

This procedure outlines the torque specifications for various engine components, including cylinder head bolts, intake manifold bolts, and exhaust manifold bolts.

  • Locate the specific engine component and identify the corresponding torque values in the provided table.
  • Clean the bolt threads and apply a light coating of threadlocker.
  • Tighten the bolts to the specified torque using a torque wrench.
View full procedure

Suspension Component Bolt Torque Specifications

This procedure provides the torque specifications for suspension components such as control arms, ball joints, and tie rod ends.

  • Identify the suspension component and locate the corresponding torque values.
  • Clean the bolt threads and apply anti-seize compound.
  • Tighten the bolts to the specified torque using a torque wrench.
View full procedure
Technical Service Bulletins

TSB 09-003-08: Revised Torque Specifications for Cylinder Head Bolts

2009-08-14

This technical bulletin provides updated torque specifications for cylinder head bolts on 2005-2011 Dodge dakota models.

2005-2011 dakota

Resolution: The revised torque specifications are as follows: Step 1: 50 Nm (37 ft-lb), Step 2: 90 Nm (66 ft-lb) + 90 degrees, Step 3: 90 degrees.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Dodge Specs. All rights reserved.

Privacy Policy Terms of Service